I used to think the same way, but the article does give a helping hand to those who are unable to find suitable drivers for expensive hardware and apps. Many people using fx Cubase and studio equipment of different kinds.
Here's a quote a friend sent me:
"After reading through the forums, I see that many off you guys and girls are having big issues geting the mlan driver
working in Vista 64 bit, Windows 7 64 bit, some in xp 64 bit and some in windows 7 32 bit.
So to give you all a headsup.
Windows 7 and Vista 64bit wont work with the xp 64 bit driver. Yes you may get some sound out of it, but it will be
crakel and dropout at best. And to install the driver you have to go through allot of steps to avoid 64 bit driver signing
etc...
Xp 64 bit driver won't work properly with a quad-core cpu. So if you have quad don't bother...
The only driver that works cross platforms is the 1.63 32 bit driver.
Xp 32 bit as we all know works perfect, but the 4Gb (3,5Gb) limitation of ram is the big setback and the way xp writes to
disk slows down your computer (if you use disks with low writhing cache or ssd).
Vista 32 bit works great, but dosen't like big memory load. So using synths like "East West Colossus" will get your system
unstable and with the 4Gb (3,5Gb) limitation you won't eaven get to load some of the instruments Razz
And then we have Windows 7 32 bit. It is not supported by Yamaha/mlan. Will never be... But the good news is that the
driver 1.63 32bit works as good as it does in xp and eaven bether than in Vista.
So if you want to upgrade your os, Windows 7 32bit is the way to go.
Yes I know the ram limitation. Well who says that win 32bit only can load 4gb of ram? answer: Windows.
I say no Wink
Here is how to setup Mlan in windows 7 32bit and patch to 64Gb memory use (No need to go 64 bit to get more ram).
Install windows 7 32bit
1. After install, go to start, computer right click, properties, device manager, IEEE 1394 Bus host controllers, select your
firewire card/port right clik and select update driver. Hit browes my computer and select let me pick from a list... Select
the legacy driver.
2. Go to start, control panel, system and security, change user account control setting, slide the slider to the bottom.
3. Install as normal
And now to enable the 64Gb of ram in Windows 7 32bit Very Happy
You need to get a patch.
Go to this link:
http://www.unawave.de/windows-7-tipps/32-bit-ram-barrier.html?lang=EN
Read and follow instructions. It is easy and works 100%
My system is Asus delux V2 X58, I7 930, 12Gb ram
01X, I88x, I88x, Uad-2, Uad-1, Uad-1 and Powercore pci-e
Cubase 5.5.1
Hope you all will finde what you need in this post. And it is nice to finaly have proper amount of memory needed for music."