MBM5 and Asus P4C800-D

[Jgtdragon]

ANyone has this board and setup MBM 5 correctly with voltage? My -12 and -5 all messed up.
My -12 reads -8.19 and -5 reads 0.00

I got the temps to read fine.

I installed the Asus proble and it doesn't display -12 and -5?

 

[Bitek]

MBM5 doesn't seem to like the new Asus boards too much. I've tried it on two (p4p8x and p4p800se) and saw the same thing. Vcore is also jacked.

When I first started it and saw my +12 @~16 and -12 @ ~7 I nearly flipped. When to Bios and everything was good. Probe does report these things for me accurately tho. Lame is doesn't report -side volts.

 

[Big Lar]

-12v and -5v rails aren't used with the newer boards, hence the odd reading

 

[Bitek]

Although other voltages still jacked. Another side-effect? Vcore off by ~10% from probe to mbm5.

 

[Big Lar]

Probe has always been known to be off, for that matter, with the newer boards, MOBO Mon is a bit off too. I use Speedfan and compare it with Mobo Mon.

 

[Margalus]

Originally posted by: Jgtdragon
ANyone has this board and setup MBM 5 correctly with voltage? My -12 and -5 all messed up.
My -12 reads -8.19 and -5 reads 0.00

I got the temps to read fine.

I installed the Asus proble and it doesn't display -12 and -5?

Just install mbm 5 and select your motherboard, that is all there is too it. Your reading for the -v rails are not off. Most psu's don't supply any real power to them since no computers use those rails.