• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Maximus formula problems

K

kevinali

Member
have just flashed to the 0907 bios and here goes the stories
1. the second ethernet controller does not work, i have enabled it in the bios, windows device manager sees only the first ethernet controller
2. I have manually set the dimm voltage to 1.8v and the led dimm voltage indicator is now red??
3. Under the power bios option, the CPU PLL voltage is reading 3.20 V in red (i have manually set this to the lowest setting)
4. The dimm voltage is reading 0.0 v in the power menu
5. North bridge voltage is 0.00 V in the power menu (i have 8 gb ram so i set it manually to 1.41v)
6. DDR Reference voltage is aslo reading 0.0V

I did have to increase the vcore to 1.2875 to get my Q6700 stable at 333 x 10 with bios 0907, under 0505 i was able to get away with 1.2750 to get it stable at 3.33Ghz

Should i rma the board for possible defective lan 2 and sensor failure

Kevin
 
Originally posted by: kevinali
have just flashed to the 0907 bios and here goes the stories
1. the second ethernet controller does not work, i have enabled it in the bios, windows device manager sees only the first ethernet controller
2. I have manually set the dimm voltage to 1.8v and the led dimm voltage indicator is now red??
3. Under the power bios option, the CPU PLL voltage is reading 3.20 V in red (i have manually set this to the lowest setting)
4. The dimm voltage is reading 0.0 v in the power menu
5. North bridge voltage is 0.00 V in the power menu (i have 8 gb ram so i set it manually to 1.41v)
6. DDR Reference voltage is aslo reading 0.0V

I did have to increase the vcore to 1.2875 to get my Q6700 stable at 333 x 10 with bios 0907, under 0505 i was able to get away with 1.2750 to get it stable at 3.33Ghz

Should i rma the board for possible defective lan 2 and sensor failure

Kevin
Click to expand...

1) reinstall drivers.
2) i dont know what that means
3,4,5,6) did you clear your CMOS of all settings before and after doing the BIOS flash?
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top