Making coasters with DVDshrink & TDK DVD+R's, HELP!

[Lothar1974]

I just bought these TDK 4x DVD +R disks and everyone has bombed at the end giving me this error:
8:47:55 AM #23 SCSI -1176 File Cdrdrv.cpp, Line 1203
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04

8:47:55 AM #24 CDR -1067 File ThreadedTransferInterface.cpp, Line 1626
Invalid field in parameter
PLEXTOR DVDR PX-708A\H0 T0

8:47:55 AM #25 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1626
Could not perform end of Disc-at-once

8:47:55 AM #26 Phase 38 File APIProgress.cpp, Line 238
Burn process failed at 2.4x (3,312 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.110 , size=24698 bytes, created 2/8/2004 11:47:12 PM



I used Memorex DVD -R before and didn't have any issues, anyone have any thoughts? I have a plextor 708A. Thanks

 

[Lothar1974]

It will burn all the way to the end 100 % and error out when finalizing the disk. Does anyone have any ideas? Thanks!! P.S. I have tried it at different speeds closed any programs, memeory should be enough I have 2gig processor is a P4 2.53.

 

[Brian48]

Had similiar problems when I first started backing up DVDs. Fixed it by switching the media I was using. For movies, I've found that DVD-Rs were more reliable with my Lite-On 851S.

 

[Lothar1974]

I email Plextor and this is what they suggested: Please update your motherboard bios and eide controller drivers from your motherboard mfgr. Also, try adding a jumper to the DMA pins on the back of
your drive, as some ide controllers work better in that mode.

Does this sound pliable to anyone?

 

[Brian48]

Sounds like the typical "I really don't know what's going on" response to me. Anyway, you can double-check your configuration as the email suggests, but I really don't think it's going to help.

 

[DAPUNISHER]

Make certain you flash your drive to the latest firmware revision for it.

 

[Lothar1974]

I have the newest firmware update. I think I will try the same DVD-R I was originally using and see if that makes a differnce, not that it should. If anyone has any other ideas I appreicate it. Thanks!