Looking for help with memory

Topper

Member
Feb 21, 2005
76
0
66
With this setup for CPU/Mobo


Abit NF7-S Rev2
Athlon XP-M 2500+
350 PSU

Would I be fine with name brand (ocz, corsair, etc.) VS PC3200 ram with overclocking?
Or should I still go with better PC3200 ram ?

All feedback appreciated.
 

Arcanedeath

Platinum Member
Jan 29, 2000
2,822
1
76
Generaly you want ram that can run 1 to 1 w/ your cpu so of you plan to go over 200mhz for the bus speed (eg oc higher than 3200+ or 2.2ghz) then you'll need to look into memory faster than DDR400 / PC3200 you'd need some DDR433 or higher ect... otherwise value memory could be fine but it tends to top out the stock 200 mhz or just a bit higher depending on brand.
 

Fern

Elite Member
Sep 30, 2003
26,907
174
106
I think it mostly depends on how you plan to go about your OC. Since the multi's unlocked on the mobile, you can just keep raising it, while keeping the FSB at 200mhz.

If you wanna really raise the FSB, look for some BH5 chips. May have to do a volt mod though as it loves voltage. I can't remember how high the vdimm goes on my NF7-S v2 (it's not nearby or I'd look).

Also, remember that most of these mobo's at stock will top-out at approx 215 - 220 mhz. Will need modded BIOS to get higher.

I just look for something that'll do Cas 2 at 200/400mhz. That way I can always go higher by relaxing it to Cas 2.5. I haven't noticed any diff in gaming with the timings relaxed a little.

The stuff in my sig is working fine for me. Bought it early this year when I went from 2 x 256 Corsair LL ram. This stuff will run at Cas 2 @ 200/400 so I don't think it'll hamper any FSB OC I do. Corsair has always treated me good, no compatibility problems.

I don't like the Value Select stuff if I'm gonna OC on this platform. I'd stay away from it and invest a little more.

Fern
 

Fern

Elite Member
Sep 30, 2003
26,907
174
106
Check this LINK. Damn, feel like selling my stuff and picking up some of this :thumbsup:

Fern
 

Topper

Member
Feb 21, 2005
76
0
66
Great feedback

Thanks for the info/input everyone.

Was already looking at ocz and think I've found a deal on some el plat. rev2