• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Looking for a radiator.

surfsatwerk

surfsatwerk

Lifer
I'm trying to find a good rad with the input/output barbs on opposite ends. I've seen pictures in the case gallery that seem to be designed like this, but when I browse various vendors I can only find rads with the input/output side by side.

I'm new to WC so maybe these things don't exist except by modding a rad or I just haven't been looking in the right places. Thanks for any help.
 
Originally posted by: surfsatwerk
I'm trying to find a good rad with the input/output barbs on opposite ends. I've seen pictures in the case gallery that seem to be designed like this, but when I browse various vendors I can only find rads with the input/output side by side.

I'm new to WC so maybe these things don't exist except by modding a rad or I just haven't been looking in the right places. Thanks for any help.
Click to expand...

X-flow radiators from black ice.

Can i ask you why your looking for one? there not the best radiators on the market.
 
I have a small case and I'm going to have to dremel out holes for the tubing to reach where I plan to mount whatever rad I end up going with. I have to live with the case for the indefinite future because of wife/decorating issues. The case has garbage airflow and only 1 120mm fan so I'm attempting to plan out a good WC setup to address my overheated cpu.

I'm looking to use the Swiftech radbox to mount a radiator on the back of my case where the only 120mm fan is. I had hoped to cut a hole for the tubing next to the PCI slots and then another near the I/O panel, because there doesn't "ideally" seem to be room to cut two well positioned holes for the tubing at either the top or bottom of the back of my case.
 
Originally posted by: surfsatwerk
I have a small case and I'm going to have to dremel out holes for the tubing to reach where I plan to mount whatever rad I end up going with. I have to live with the case for the indefinite future because of wife/decorating issues. The case has garbage airflow and only 1 120mm fan so I'm attempting to plan out a good WC setup to address my overheated cpu.

I'm looking to use the Swiftech radbox to mount a radiator on the back of my case where the only 120mm fan is. I had hoped to cut a hole for the tubing next to the PCI slots and then another near the I/O panel, because there doesn't "ideally" seem to be room to cut two well positioned holes for the tubing at either the top or bottom of the back of my case.
Click to expand...

how about having the radiator upside down on that rad box. So the barbs are at the bottom, then you can have the tubes pass though your PCI holes on the rear of the case?
 
I hadn't thought of that. Hmm... after a little tape measuring it looks Like I could go with the Swiftech 3 fan model and just mount it upside down using the holes in the middle of the rad. Thanks for the input!
 
Originally posted by: surfsatwerk
I hadn't thought of that. Hmm... after a little tape measuring it looks Like I could go with the Swiftech 3 fan model and just mount it upside down using the holes in the middle of the rad. Thanks for the input!
Click to expand...

lol thats why were here. 😀
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top