I am looking for a 400w ps..
My choices so far:
Antec 400w..pp412x..P4 and AMD approved or pp-403x ..just amd approved..Antec
Enermax 431 whisper quiet..but I am concerned about the 5v rail problems...these have been reported on Epox...<a target=new class=ftalternatingbarlinklarge href="http://www.enermax.com.tw/PRODUCTS/SWITCH-MAIN.HTM[l]
Sparkle 400w....[l=FSP-400-60GN]http://www.sparklepower.com/pdf/FSP400-60GN.pdf">enermax whisper quiet 431w</a>
which would you recommend
My planned system
Athlon1700
KR7A-RAID
512 pc2100 crucial ram
40 gb Maxtor HDD
30 gb Maxtor HDD
48 cdrom
24102b liteon cdrw
sb live 5.1 x gamer
Realtek NIC
Adaptec 2906 scsi card
floppy
Hi..I have a 300w ps from Antec works fine with this setup:
Athlon 1.2@1.38 10x138
A7V133
384 mg ram(2 mosel and 1 pny stick)
40 gb Maxtor HDD
30 gb Maxtor HDD
48 cdrom
24102b liteon cdrw
sb live 5.1 x gamer
Realtek NIC
Adaptec 2906 scsi card
floppy
I am switching to athlon xp 1700 and KR7A-RAID...my current Antec 300w PS worked fine at 146 fsb with just mosel ram..the pny will not cas 2 at 146..it will do cas2 at 138...top fsb with the pny was like 142 or 143 but at cas3
I am hoping to get the 1700 at 150 fsb with 512 Crucial pc2100 ddr ram..do I have a chance or will I need to boost the Poewr supply ....I could get a 350 w..smaller less expensive
My choices so far:
Antec 400w..pp412x..P4 and AMD approved or pp-403x ..just amd approved..Antec
Enermax 431 whisper quiet..but I am concerned about the 5v rail problems...these have been reported on Epox...<a target=new class=ftalternatingbarlinklarge href="http://www.enermax.com.tw/PRODUCTS/SWITCH-MAIN.HTM[l]
Sparkle 400w....[l=FSP-400-60GN]http://www.sparklepower.com/pdf/FSP400-60GN.pdf">enermax whisper quiet 431w</a>
which would you recommend
My planned system
Athlon1700
KR7A-RAID
512 pc2100 crucial ram
40 gb Maxtor HDD
30 gb Maxtor HDD
48 cdrom
24102b liteon cdrw
sb live 5.1 x gamer
Realtek NIC
Adaptec 2906 scsi card
floppy
Hi..I have a 300w ps from Antec works fine with this setup:
Athlon 1.2@1.38 10x138
A7V133
384 mg ram(2 mosel and 1 pny stick)
40 gb Maxtor HDD
30 gb Maxtor HDD
48 cdrom
24102b liteon cdrw
sb live 5.1 x gamer
Realtek NIC
Adaptec 2906 scsi card
floppy
I am switching to athlon xp 1700 and KR7A-RAID...my current Antec 300w PS worked fine at 146 fsb with just mosel ram..the pny will not cas 2 at 146..it will do cas2 at 138...top fsb with the pny was like 142 or 143 but at cas3
I am hoping to get the 1700 at 150 fsb with 512 Crucial pc2100 ddr ram..do I have a chance or will I need to boost the Poewr supply ....I could get a 350 w..smaller less expensive
