Looking for a dremel tool

[Bateluer]

Looking at this one

Feedback?

Edit - Or maybe a more complete kit

 

[Fullmetal Chocobo]

The linked one is a good dremel. I've had it for a while, and I'm still using it (albeit on steel). Dont' get a wireless dremel tool, they are fvcking worthless (went through that too). Use some form of lubricant when cutting metal. When cutting steel, I use drilling oil, and oh my god there is such a wonderful difference (thanks again GalvanizedYankee). What kind of pattern do you plan on cutting? And have you used a dremel before? For n00b stuff, I can definitely help you out. I've learned a lot, but I'm nothing near a pro. But I can help you out with initial stuff, for sure.

 

[TrevorRC]

Originally posted by: Fullmetal Chocobo
The linked one is a good dremel. I've had it for a while, and I'm still using it (albeit on steel). Dont' get a wireless dremel tool, they are fvcking worthless (went through that too). Use some form of lubricant when cutting metal. When cutting steel, I use drilling oil, and oh my god there is such a wonderful difference (thanks again GalvanizedYankee). What kind of pattern do you plan on cutting? And have you used a dremel before? For n00b stuff, I can definitely help you out. I've learned a lot, but I'm nothing near a pro. But I can help you out with initial stuff, for sure.

He never mentioned that bit of drilling oil to me Thanks Choco. Keep that in mind with the next case.

 

[GalvanizedYankee]

Fullmetal: Find and buy Rapid Tap. What your using is probably a 5, Rapid Tap is a 10.

Trevor: Heed the above. It's to be used on everything but files, stones or sandpaper.
Works great on drills, high speed rotory files, hacksaws, nibblers, light chisel work and
tin snips/shears. A trace on the surface of the metal is all it takes.
Works on most known metals

I told you this RC. Plus, bee's wax is an excellent cutting agent for aluminum.


OP, you do NOT want a Dremel. What you seek is a high speed rotory tool that accepts
1/8" shanks. My Dremel is worn out after 9 years of use/abuse. My next tool of this type
will be a corded Black&Decker HS rotory tool because they offer more wattage=power.


...Galvanized

 

[Bateluer]

To clarify, I want this tool to mod a Lian Li PC-V2000B case, specifically to add mounting holes for a dual 120mm fan radiator. Most likely at the top of the case, on the exterior.

Why don't I want a Dremel, Galvanized? I thought they were solid tools and would do the job?

 

[Fullmetal Chocobo]

Originally posted by: Bateluer
To clarify, I want this tool to mod a Lian Li PC-V2000B case, specifically to add mounting holes for a dual 120mm fan radiator. Most likely at the top of the case, on the exterior.

Why don't I want a Dremel, Galvanized? I thought they were solid tools and would do the job?

They are decent tools. But there are tools out there that do the job better. Much like Antec is known for PSUs, but Enhance would probably get the job done better... (my $.02)

 

[GalvanizedYankee]

Dremel is not a tool type but a company name. Like Intel is not a proc but a company name.
Dremel bought out Black&Decker 15 years ago. B&D is the better high speed rotory tool.
It draws more amps & has more power. NEVER go cordless, corded only. Because cordless
is like pickin' a gee-tar that won't stay in tune. B&D is better and cheaper. It will be this
tool mans next high speed tool of this type. If I get serious, the air compressor gets turned
on and the 1/4" air die grinders come out Trust me, buy B&D.

Drill the rivets, remove the top panel, protect the exterior with tape&cardboard. Then work
it from the inside. Slippage marks will be on the interior this way.


...Galvanized

 

[Bateluer]

Originally posted by: GalvanizedYankee
Dremel is not a tool type but a company name. Like Intel is not a proc but a company name.
Dremel bought out Black&Decker 15 years ago. B&D is the better high speed rotory tool.
It draws more amps & has more power. NEVER go cordless, corded only. Because cordless
is like pickin' a gee-tar that won't stay in tune. B&D is better and cheaper. It will be this
tool mans next high speed tool of this type. If I get serious, the air compressor gets turned
on and the 1/4" air die grinders come out Trust me, buy B&D.

Drill the rivets, remove the top panel, protect the exterior with tape&cardboard. Then work
it from the inside. Slippage marks will be on the interior this way.


...Galvanized

Any particular tool you suggest then?

I know Dremel is a company name, btw

 

[GalvanizedYankee]

I can't shop for you but the B&D RTX draws 2.0A and Dremel doesn't even get close.
Most of the bits are here already so a kit is not in the plan, just the motor. The RTX comes
in two types, a three speed that is real work oriented as it will hold power better, I think,
at 12krpm but will offer 24k & 30k. The other is variable speed, 8k to 30k. Both draw 2.0A.

8k is good for the tiny sanding drums. They are used at lower speeds with a lite touch. Higher
speeds are for rotary files & stones. Buffing mops work well at 12k. Sanding disks are a waste
of my time YMMV. Abrasive cut off disks are kewl and I must get a diamond impregnated one soon.
You can read most of this online in the tips section of this type of tools use. I have a link
for high speed rotary work. I'll find it and post it later. My dogs tired & I'm yawning.


...Galvanized

 

[Bateluer]

Bump

 

[GalvanizedYankee]

Bump. I can't offer the OP anymore

EDIT: I could not find the link to the tutorial.


...Galvanized

 

[framerateuk]

Ive found my cordless lithium ion Dremel fine. But i dont really use it for very heavy work. Ive used it for removing paint from water pipes, and use it a lot on a guitar im building (especially for delicate work where i dont want a cord getting in my way).

 

[pkme2]

I have a nice Dremel AC powered tool for small precision work. Working on computer cases require something more formidable.
I use my RotoZip on my LL's, cutting holes for 120mm fans. I sized the openings, use tape on the cutter/grinder drill bit (for depth adjustment) and with a plywood template, cut really neat and clean holes.

 

[Bateluer]

Originally posted by: pkme2
I have a nice Dremel AC powered tool for small precision work. Working on computer cases require something more formidable.
I use my RotoZip on my LL's, cutting holes for 120mm fans. I sized the openings, use tape on the cutter/grinder drill bit (for depth adjustment) and with a plywood template, cut really neat and clean holes.

Explain: RotoZip

In case anyone hasn't guessed it, I've never altered any cases I've owned in the past.

 

[Cobolman]

Actually, the cordless dremels are just fine, they're just a tool for a different job.

They're excellent for working on plastics, because their slower RPMs mean you actually cut the plastic rather than melting it.

 

[Cobolman]

Originally posted by: Bateluer

Explain: RotoZip

In case anyone hasn't guessed it, I've never altered any cases I've owned in the past.

RotoZip is a Black & Decker tool. Basically, it's an up-sized dremel.

 

[foghorn67]

Watch out for the torque on the RotoZip, geesh...it's hard to control.