I am trying to set up an older computer, AMD K6-300 w/ Win98, so that it will work with our Linksys BEFW11SE all-in-one cable/dsl router, wirless access point, 4 port hub.
Both the WMP11 wirless PCI card and the WUSB11 wirless USB adapter have resulted in the same problem; it seems that the adapters are recognized everywhere but in WINIPCFG.
The setup software and hardware seem to install fine.
The Linksys configuration software is running and shows a strong signal.
The Adapter shows up in the system and network portions in Control Panel.
**The adapter is not listed in WINIPCFG**
Seems like only half the system is finding the adapter, and without WINIPCFG I can't get the adapter configured for the network or internet sharing.
Any help would be greatly appreciated.
Thanks,
Both the WMP11 wirless PCI card and the WUSB11 wirless USB adapter have resulted in the same problem; it seems that the adapters are recognized everywhere but in WINIPCFG.
The setup software and hardware seem to install fine.
The Linksys configuration software is running and shows a strong signal.
The Adapter shows up in the system and network portions in Control Panel.
**The adapter is not listed in WINIPCFG**
Seems like only half the system is finding the adapter, and without WINIPCFG I can't get the adapter configured for the network or internet sharing.
Any help would be greatly appreciated.
Thanks,