Limited or no conectivity

[Bushman5]

Ok so things ive tried.

Ive check the network cables eveyr otehr oc works except 1. The cable that is going into the none working pc ive tried it on other pcs and it works fine.

Ive changed the duplex
Ran winsockxpFIX


Wat else cna i try to get it connected thanks =)

 

[spidey07]

try a different cable and different port on the switch.

Just because the cable works in a couple machines doesn't mean the cable is good. Especially if it a homemade cable.

 

[JackMDS]

In General you can debug the Network Setting of the computer following these steps.

Step One. Check the Network parameters in the Computer?s Device Manager. Make sure that the drivers are installed correctly; there is No IRQ conflict, and No Ghost installation. http://www.ezlan.net/faq#ghost

Step Two.Verify Basic network setting in the OS: http://www.ezlan.net/Installing#verify
If the above two Steps indicates that every thing looks good but functionally it does not work.

Step Three. Check (and repair if necessary) the Socket Layers, Winsock, and or refresh the TCP/IP Stack. http://www.ezlan.net/clean#refreshnet

If need to Reinstall; Log to this page it have a lot of links to instructions to Windows Network Settings, and Sharing: http://www.ezlan.net/Installing.html.

:sun: