Just for the fun of it i tried running my aging memory chips at 133mhz (fsb+pci), and it's been running sweet. Ran prime95 for 6 hours, and 3dmark 2000 for about half an hour. Extended testing will offcourse be needed. I also enabled the 4-way interleave thing in the bios, allthought i've heard that it only works for double-sided 128mb/256mb parts. When i bought the ram back in 98 (does sl2qg/bx6 ring a bell?) it was only a substitute for samsung GH, which i couldn't get a hold of.
Stats:
2x64mb LGS -7J PC100 10ns 3-2-2 (cas3). one is double-sided.
Abit Kt7-raid -WW bios (official)
Duron 650@900
other stuff
Sandra 2001 scores:
standard settings 100mhz:
(4-way interleave=off, dram pagemode=off, cas3, 10/8ns)
283/295
slightly tweaked settings 100mhz:
(4-way interleave=on, dram pagemode=on, cas3, 10/8ns)
377/396
slightly tweaked settings 133mhz:
(4-way interleave=on, dram pagemode=on, cas3, 10/8ns)
453/523
If the system turns out to be stable i'll try to tweak some more
Stats:
2x64mb LGS -7J PC100 10ns 3-2-2 (cas3). one is double-sided.
Abit Kt7-raid -WW bios (official)
Duron 650@900
other stuff
Sandra 2001 scores:
standard settings 100mhz:
(4-way interleave=off, dram pagemode=off, cas3, 10/8ns)
283/295
slightly tweaked settings 100mhz:
(4-way interleave=on, dram pagemode=on, cas3, 10/8ns)
377/396
slightly tweaked settings 133mhz:
(4-way interleave=on, dram pagemode=on, cas3, 10/8ns)
453/523
If the system turns out to be stable i'll try to tweak some more
Facebook
Twitter