• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

kt7a ram problem

A

AkumaX

Lifer
on my kt7a ( bios 65 ), it doesnt matter on what ram slots i use ( i have 4 GOOD memory sticks ), my freakin memory shows up as 8mb!!!!! i have 2 x 128mb and 2 x 256mb, and it doesnt matter what combination i use ( 1 stick of 256 on dimm #1 or 2 x 256mb on dimm #2 & #3 ) it always shows up as 8mb!!!! (i tested the ram in other systems, shows up fine.

help!!!!!!
 
Has it ever shown up correctly on this system? Is this a new system? Did the problem just appear now? Installed anything new? BIOS flash? Cleared CMOS with jumper? More info, please.
 
yah, ram has showed up correctly in my system, but after i stuck in another hd, it only showed 8mb ( i had 2 x 128mb + 1 x 256mb ) system is relatively new, had it working for a while today, i just got a new cpu/vid/hd/cdrom/ps/etc... just started happening now. went from a duron 700 to tbird 1.333. mobo has newest bios already, so no flashing necessary. cleared CMOS jumper a few times already 🙁

Has it ever shown up correctly on this system? Is this a new system? Did the problem just appear now? Installed anything new? BIOS flash? Cleared CMOS with jumper? More info, please.
 
the RAM should populate the banks from dimm 1 to dimm 3. is this pc-133 or pc-100? what is the fsb set too? where is this new hard drive plugged into on the mobo? is it set as master or slave? did you flash the bios before or after clearing cmos? is this memory with or without parity?
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top