kt7 raid/plex in pio/pci bus-50mhz, what the f#$%!!!!!!

[punkkloser]

i got my barebones kit from mwave yesterday.thunderbird 800/kt7 raid/128 mbpc133,added two 20 gig ata 66 maxtor hard drives,soundblaster,tnt 2.ok,sisoft sandra says my pci bus is running at 50mhz,and it is set to 33 on softmenu(100/33)?????????????????????????????????. the two maxtors are hooked up to 3&4,and my plex 8432 is ide 1,toshiba 6702 is ide 2.the initial screen says my plex is in pio??????.ive tried everything to change to dma,tosh is in dma??? ive read the kt7 faq and i think i'm doing this right.all drives are set to master.am i doing something wrong with the setup

 

[loosbrew]

ok, go into the kt7 bios and set the udma to disable on the ide controllers ...then go into win2k and set them as udma in the device manager. then reboot. worked for me.


looooo

 

[tboo]

I have a KT7-Raid with a 900tbird@1100(10*110) and Scisoft says my PCI bus is at 55mhz-Ive learned to ignore a lot of the Scisoft info-it also says my CPU voltage is .05-they have a lot of bugs to work out