• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

KG7-RAID problems with power-up

C

Cybertopia

Member
Ok, I just bought a KG7-Raid from compgeeks using the NewEgg's Agoia 1600XP+ processor. I have plugged everything in correctly, which I believe. Now, when I try to start up the computer, the fans go on for like half a second then turn off. I cannot send power again until I unplug and plug the power back into the motherboard. I'm using the delta 300 watt powersupply and I tested it so it works fine.

anyone know any tips to fix my problem?? why the power goes on for only .5 seconds... I have the CPU fan connected to the fan 1 and the case fan connected to fan 4. i reversed the two fans, and still the same. and fan 2 is connected to a fan on the motherboard. hmm...

any help would be appreciated thanks.
 
ok, i found the problem is the powersupply. it is the delta one that needs to be modded.

now i have another problem though. the fans power up fine and continously; however, nothing displays on the monitor. it is not the video card either, because it has been tested to be good. could it be the cpu?

thanks
 
Usually CPU, RAM or AGP video card not seated properly or a drive data cable connected upside down or only on half the pins (usually floppy or zip drives). Also unplug the AC from the computer and do a CMOS clear per your manual's instructions.
.b.h..

 
You must log in or register to reply here.

TRENDING THREADS

Back
Top