K8N Neo2 and XP-90 with OCZ DDR Booster?

[Aries64]

Is anyone here running a K8N Neo2 with an XP-90 HS and an OCZ DDR Booster? I am going to install an XP-90 and a 92mm Panaflo in my system but I also want to try the DDR Booster and would like to know beforehand if the XP-90 will clear the DDR Booster.

Thanks in advance.

 

[Yourself]

I'm using that combination and it's a bit tight, but works fine.

 

[Aries64]

Is anyone here running a K8N Neo2 with an XP-90 HS and an OCZ DDR Booster? I am going to install an XP-90 and a 92mm Panaflo in my system but I also want to try the DDR Booster and would like to know beforehand if the XP-90 will clear the DDR Booster.

I'm using that combination and it's a bit tight, but works fine.

Thanks fro the quick reply Yourself. Are you able to tweek the pot without too much trouble?

 

[Yourself]

Originally posted by: Aries64

Is anyone here running a K8N Neo2 with an XP-90 HS and an OCZ DDR Booster? I am going to install an XP-90 and a 92mm Panaflo in my system but I also want to try the DDR Booster and would like to know beforehand if the XP-90 will clear the DDR Booster.

I'm using that combination and it's a bit tight, but works fine.

Thanks fro the quick reply Yourself. Are you able to tweek the pot without too much trouble?

Yep, you can get to the pot, but seeing the readout is tricky because it's facing down towards the other DIMM slots. You CAN see it, but you have to get right down there and look between the booster and the edge of XP-90.

 

[Aries64]

Yep, you can get to the pot, but seeing the readout is tricky because it's facing down towards the other DIMM slots. You CAN see it, but you have to get right down there and look between the booster and the edge of XP-90.

Thanks for the reply Yourself. That might work OK, because the V1000 case inverts the motherboard, so the readout will actually be facing "up". Just have to be able to read it upsidedown.