My current setup is a K7V with an Athlon (classic 0.18u) 700 which is overclocked to 850 Mhz using 2/5 cachedivider and 1.75V Vcore with a TD2 goldfinger device. The problem i have is when i do a cold start it doesent post and the alarm starts going off (voltage monitoring is disabled), and when i press RESET it posts as it should at runs perfectly stable. It works, but it is quite annoying that it does something like this. any help would be appreciated.
My setup;
K7V Rev 1.01 (Jumper mode,VCore set through TD2 since it is the only thing that works for me)
Athlon K75 700 0.18u
Elsa Erazor III TNT2 Video
Realtek AS2095 (i think ) Network card.
SB Live 1024
Cyberlink Satellite card
20 Gb IBM Deskstar something.
AdvanSys Scsi card + cdr
300 W athlon certifed PowerMan PSU.
My setup;
K7V Rev 1.01 (Jumper mode,VCore set through TD2 since it is the only thing that works for me)
Athlon K75 700 0.18u
Elsa Erazor III TNT2 Video
Realtek AS2095 (i think ) Network card.
SB Live 1024
Cyberlink Satellite card
20 Gb IBM Deskstar something.
AdvanSys Scsi card + cdr
300 W athlon certifed PowerMan PSU.
Facebook
Twitter