• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

K7t pro2: help setting up

P

phi0913

Junior Member
I just got my new k7t pro2. The Bios cannot auto-detect the hard drives at all [i tried 3 different hard drives: 30GB Maxtor, 10GB Maxtor..] I did adjust the jumpers on the hard drives. What should I do?

 
Taurus - It's very difficult to FDISK and Format a drive that the controller on the motherboard does not recognize as being present.

Check and then double check your cables. Reversed cables happen - even to the best of us.
(remember, the stripe on the cable is pin 1 and is generally on the side closest to the drive power connector.)


Try a different I/O cable -

Check your bios settings - It might be that the controller is disabled -

Try the other controller connector - might be that the primary controller is out to lunch - don't know that you could boot from the second IDE but if the drives are recognized that points at the Primary IDE as being the problem.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top