just reinstalled rc5 after an absence

[ModemMix]

and when last i was involved there was a team server to obtain blocks from and flush to that would show stats alot more often then the dnet servers...or maybe im just smoking crack. i think it was dhs.somthing. id like to get my cliant setup to flush to that server so i can see the stats in a timly manner can anyone refresh my memory or just tell me im a retard and there never was such a thing....


thanx


ModemMix

 

[Wolfie]

hahaha.. no retard here.....

Point your server to proxy.teamanandtech.com This is a round robin server.

It will show up at mika's stats.....

mika stats

[edit]oh and his stats are updated every half hour.
full stats 15 and 45 min on each hour.....
weekly stats are 00 and 30 min on each hour.[/edit]

Hope this helps.
AND WELCOME BACK!!!!!!!!! WOOT!!!!!
Wolf

 

[ModemMix]

thanx for the refresher. And now that i know where to point my cliant im fumbling around in the cliant trying to remember where to make the changes, ill give you a nickle for another hint 🙂


thanx

ModemMix

 

[Wolfie]

🙂
When you bring up the configure window.... it will give you some options..... (The settings for flush stuff might be different. IE. OGR=0. flush size. stuff like that.)

1) General Client Options
2) Buffer and Buffer Update Options
3) Performance related options
4) Logging Options

9) Discard settings and exit
0) Save settings and exit


Choice -->
Enter 2 here.

Now, when this comes up.....

distributed.net client configuration: Buffer and Buffer Update Options
--------------------------------------------------------------------------
1) Buffer in memory only? (no disk I/O) ==> no
2) In-Buffer Filename Prefix ==> buff-in
3) Out-Buffer Filename Prefix ==> buff-out
4) Checkpoint Filename ==> cp
5) Disable buffer updates from/to a keyserver ==> no
6) Keyserver<->client connectivity options
7) Disable buffer updates from/to remote buffers ==> no
8) Remote buffer directory ==>
9) Load-work precedence ==> RC5,OGR=0,DES=0,CSC=0
10) Additional buffer-level checking ==> 0 (none)
11) Buffer-level check interval ==> 0:00 (on buffer change)
12) Preferred packet size (2^X keys/packet) ==> RC5=33
13) Fetch work threshold ==> RC5=100,OGR=0
14) Fetch time threshold (in hours) ==> RC5=0

0) Return to main menu

Choice -->
Enter 6 here

When this comes up....

distributed.net client configuration: Keyserver<->client connectivity options
--------------------------------------------------------------------------
1) Network Timeout (seconds) ==> 60 (default)
2) Automatically select a distributed.net keyserver? ==> no
3) Keyserver hostname ==> proxy.teamanandtech.com
4) Keyserver port ==>
5) Keyserver is a personal proxy on a protected LAN? ==> yes
6) Firewall/proxy protocol ==> none/transparent/mapped
7) Use HTTP encapsulation even if not using an HTTP proxy? ==> no
8) Always use UUEncoding? ==> no
9) Dialup-link detection ==> Normal mode

0) Return to Buffer and Buffer Update Options

Choice -->
Change #2 to no and go into #3 and add the server url
and the port you can leave alone...

When you are done with that.... it should be set to flush to the right server...... good luck!!!

Wolf

 

[MWalkden]

Here is a sample INI file, if you have any questions just keep putting them down and someone will help!🙂

[parameters]
id=rc5crackheads@hotmail.com

[triggers]
exit-flag-filename=
pause-on-no-mains-power=no

[rc5]
fetch-workunit-threshold=2048
randomprefix=233
preferred-blocksize=33

[networking]
autofindkeyserver=no
keyserver=teamanandtech.dhs.org:2064
disabled=no

[buffers]
buffer-file-basename=buff-in
output-file-basename=buff-out
checkpoint-filename=cp
alternate-buffer-directory=\\King\Dnet
frequent-threshold-checks=0
threshold-check-interval=0:00
allow-update-from-altbuffer=no

[misc]
project-priority=RC5,CSC=0,DES=0,OGR=0

Note: this last line is used to prevent the client from automatically loading OGR blocks (it will do that and you will share your CPU time with OGR! Add this line and heading!)