• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Just joined for 1 purpose!

Wedge7

Junior Member
To be part of history !!! ....and reply to this ----> funnest thread in history

But its locked🙁

Still was damn funny😀

---

That is far from the funniest thread AnandTech has seen since its beginnings. However, this locked thread goes down in history and "yet another useless post".

AnandTech Moderator


 


<< btw Wedge7 welcome! 🙂 >>



And buh-bye!

rolleye.gif
n00bs
rolleye.gif
 
Can' believe this lasted a whole hour. Mods must be sleeping.

---

Shhhhhhh, I just woke up. Don't tell Anand I was sleeping on the job.

AnandTech Sleepy Moderator



 
I just wanted to not nef or flame the guy... I had a a similar problem and wanted a review on his water cooling setup... I hear AMD's are less flammable and so I just decided to switch to AMD. Friend told me to use nitroglycerin for thermal grease and an Alpha PAL 8045 HS/F for quietest cooling... my P4 blew up and I asked him why... he said that it was Intel's fault and try for an RMA. So next I buy the greatest HS available... which would be one made from C4 and try an Athlon XP 2000+ (still using the same nitroglycerin for thermal grease). So I need a review because water might be less prone to starting a fire in my CPU although it might be good for cooling. I hear you need a butler to constantly pour it all over the internal components (those are cheaper than any HS/F combo around right?). Just looking into future options...

[edit]spelling[/edit]
 


<< I just wanted to not nef or flame the guy... I had a a similar problem and wanted a review on his water cooling setup... I hear AMD's are less flammable and so I just decided to switch to AMD. Friend told me to use nitroglycerin for thermal grease and an Alpha PAL 8045 HS/F for quietest cooling... my P4 blew up and I asked him why... he said that it was Intel's fault and try for an RMA. So next I buy the greatest HS available... which would be one made from C4 and try an Athlon XP 2000+ (still using the same nitroglycerin for thermal grease). So I need a review because water might be less prone to starting a fire in my CPU although it might be good for cooling. I hear you need a butler to constantly pour it all over the internal components (those are cheaper than any HS/F combo around right?). Just looking into future options...

[edit]spelling[/edit]
>>



LMAO!!!!!
 
Back
Top