Just got my 1ghz T-Bird!!! (OCing Updates)

[Jiggz]

Actually, most 1Ghz Tb are 100 FSB. Take note, multiplier setting doesn't have anything to do with the PCI and AGP peripheral. A 10 X 100FSB and 7.5 X 133 FSB will both run the PCI and AGP at their default speed of 33Mhz and 66Mhz. So running the 1 Ghz to 10.5 X 133Mhz does not in anyshape or form affects the speed of the PCI and AGP!😎

 

[gnoymyguy]

Scouzer - I know that most 1ghz run 200fsb but if you've got a board that runs 133 default then wouldn't you start from that point?

Jiggz - maybe I was a little confused in my post, but the point I'm trying to make is 132x10.5 would be pushing the agp and pci 32% more, wouldn't it? At 133x10.5 you would once again run at default agp and pci.

I understand that the A7V133 has 100 and 133fsb bios enabled, whereas my K7T Turbo requires a jumper change. At 100fsb setting, going to 132 is running the other ports way out of spec, but at 133fsb things run at default.

So in this confusing post, what I'm trying to say is if AMDPwred can run 130fsb, that is pushing his memory, agp and pci quite hard so I'd expect from that if he runs from 133fsb default, why can't he run 140fsbx10?

I know what I'm trying to say, just can't convert thoughts to words:frown:😕

 

[AMDPwred]

<< So in this confusing post, what I'm trying to say is if AMDPwred can run 130fsb, that is pushing his memory, agp and pci quite hard so I'd expect from that if he runs from 133fsb default, why can't he run 140fsbx10? >>



For some reason it just wouldn't boot up at all even with 1.85v. My fsb didn't want to go any higher than 133. I even took out the generic ram and used the crucial and it still didn't work. Oh well, I love the many new fps I'm seeing in CS (stays at 99 all the time), Nascar 4 (70-90), and Tribes 2 (50-60 outside, 110-130 inside)🙂