Iwill KK266 ... Help, I can only set FSB up to 132mhz ... can't choose any higher ....

[stso]

I can only set it between 100 to 132, and can't go any higher than that ... Can anyone help me? Thanks.

 

[Technonut]

You have to have the jumper set to a 133FSB to access above 132 on the KK266. The location of the jumper is on page 6 in the manual.

 

[stso]

I tried it before, but it won't post

 

[Technonut]

If you are running a 200 FSB processor that will not boot with the jumper at 133, check out the Overclocking w/ the 133MHz FSB: The "Issue" article. It should give you the info you need.