Just assembling my first system (1.33 AMD AXIA 266; 64MB DDR ATI Radeon; 512 MB DDR Crucial etc) with an Iwill KA266. Can anyone point me to somewhere for an explaination of the jumper settings/options:My Q particularly:
1. Page 9 :
CPU FSB & Memory Speed setting
OFF (open) CPU133/133MHz
ON (Short)CPU 100/100Mhz
Then it says KA266/KA266-R only supports synchronuos CPU & memory speed.
SO BASED ON ABOVE WHAT DO I CHOOSE.
2. Page 11 :
Wake on Modem. There are three pins. 1: 5VSB; 2: GND; 3 Control Pin. If I want it to wake do I chose 1 and 2 or 2 and 3.
If someone could answer these or point me somewhere I think I might be able to work the others out and get it powered up.
Links to somewhere with a step by step also appreciated.
Sorry if similar Q been posted, could not find much on a search,
Thanks
1. Page 9 :
CPU FSB & Memory Speed setting
OFF (open) CPU133/133MHz
ON (Short)CPU 100/100Mhz
Then it says KA266/KA266-R only supports synchronuos CPU & memory speed.
SO BASED ON ABOVE WHAT DO I CHOOSE.
2. Page 11 :
Wake on Modem. There are three pins. 1: 5VSB; 2: GND; 3 Control Pin. If I want it to wake do I chose 1 and 2 or 2 and 3.
If someone could answer these or point me somewhere I think I might be able to work the others out and get it powered up.
Links to somewhere with a step by step also appreciated.
Sorry if similar Q been posted, could not find much on a search,
Thanks