I've been extremely bored

[Reiniku]

out of sheer boredom and anxiety waiting for my mobo to come back i've gotten to the point where i sleeved everything possible in my case. sadly i had to resort to electrical tape in some instances, which results in a sort of hack c grade look for some of it. anyway i sleeved all the necessary neopower cables (except for the 12v to keep warranty and sata cable just because i CANT >_<!) as well as everything coming from my case.

anyway few are probably really interested and i couldn't really get all my sleeving into the shot, but here they are lol.

Ultra PSU (no longer using)

Praetorian Insides

Prae Again (can sorta see NeoPower)

anyway... don't really know why i posted this... but i did lol.

 

[0010010110]

Originally posted by: Reiniku
out of sheer boredom and anxiety waiting for my mobo to come back i've gotten to the point where i sleeved everything possible in my case.

:Q

Very nice sleeving job though. :beer:

 

[EternusNox]

Looks good. Did you have any luck getting the sleeves to fit over the modular PSU connector or did you have to remove all the molex connectors? I was wanting to do the same thing to my Neopower. I used electrical tape for my last PSU. Any other tips you'd like to share would be helpful. Thanks.

 

[ubercaffeinated]

That is very nice and clean. Good job!

 

[Reiniku]

Originally posted by: EternusNox
Looks good. Did you have any luck getting the sleeves to fit over the modular PSU connector or did you have to remove all the molex connectors? I was wanting to do the same thing to my Neopower. I used electrical tape for my last PSU. Any other tips you'd like to share would be helpful. Thanks.

i took a good look at the neopower psu connection and it seemed like the pins were a smaller version of the standard molex pins. that said i couldn't get them off and had to go the long way removing each molex. i only had to sleeve 2 molex trails and am currently trying to figure a way to sleeve a sata one. other than that i just have the cc inverter and switch to sleeve and id have nothing left lol.

 

[fireontheway]

Good job with the sleeving,that's time well spent.On your Ultra psu,i noticed that threre are 2 molex connectors on the same dongle facing the opposite way(incase you missed it)

 

[Thurgo0dy]

wow...that looks awesome

 

[Reiniku]

thanks. im starting to run out of things to do now though... asus' rma policy is just to the point of annoying now. ive even added all the necessary cables into the case like ide and sata connectors.... gonna be harder to wire manage now that ive seen just how much longer my wires are and just how many more of htem i have. wish me luck when my mobo comes back lol.

 

[MisterChief]

:shocked:

That's what I call a hobby...

 

[Reiniku]

not really hobby... more like a desparate call for help or way to avert death from boredom

 

[Reiniku]

Originally posted by: fireontheway
Good job with the sleeving,that's time well spent.On your Ultra psu,i noticed that threre are 2 molex connectors on the same dongle facing the opposite way(incase you missed it)

i dont quite know what you mean. as far as the ultra connectors they're sorta alternated so each one faces opposite ways... i think

 

[fireontheway]

The connectors are normally "dress right dress" but if they came that way oh well.

 

[Sp33d]

bravo

 

[Fullmetal Chocobo]

what size sleeving cable did you use (1/2, 1/4, 1/8, etc) for the PSU?
Tas.

 

[Maluno]

You have inspired me. Now just where did I leave that electrical tape...

 

[imported_Kensai]

Want to sleeve my stuff too?