Hi.
My overclock settings won't stay for some reason in the BIOS, and can't find out what's going on.
It happens when I restart windows once in a while, and when I access MIT, it shows the red box with overclock failed blah blah...
Are my oc settings unstable?Because I never got a BSOD.
My setup is:
EX58-UD3R rev 1.6
Gskill 2x3 6GB F3-12800CL8-2GBPI
i7-920 D0
CPU clock ratio: 19x
QPI clock ratio: 36x
uncore clock ratio: x16
isochronous support: enabled
BCLK: 200
Performance enhance: standard
XMP: disabled
Cpu vcore: 1.23750V
QPI/VTT voltage: 1.420V
IOH Core: 1.160V
DRAM Voltage: 1.660V
Memory timing
8 8 8 24
CMD : 2
CIE/EIST disabled
P.S. Any insights/thoughts are appreciated.
And Am I missing any other piece of information?
Edit: When I restart and run cpuz, every setting is intact, except the clock.
My overclock settings won't stay for some reason in the BIOS, and can't find out what's going on.
It happens when I restart windows once in a while, and when I access MIT, it shows the red box with overclock failed blah blah...
Are my oc settings unstable?Because I never got a BSOD.
My setup is:
EX58-UD3R rev 1.6
Gskill 2x3 6GB F3-12800CL8-2GBPI
i7-920 D0
CPU clock ratio: 19x
QPI clock ratio: 36x
uncore clock ratio: x16
isochronous support: enabled
BCLK: 200
Performance enhance: standard
XMP: disabled
Cpu vcore: 1.23750V
QPI/VTT voltage: 1.420V
IOH Core: 1.160V
DRAM Voltage: 1.660V
Memory timing
8 8 8 24
CMD : 2
CIE/EIST disabled
P.S. Any insights/thoughts are appreciated.
And Am I missing any other piece of information?
Edit: When I restart and run cpuz, every setting is intact, except the clock.
Last edited:
Facebook
Twitter