at 333 fsb you're looking at a x of 13.5 as a max for multi. Maybe able to get 14 if you're lucky ^^ My 2500 is 13.5 x 166 = 2.25 and it's very fast. My whole problem is my 2100
It's your RAM that becomes unstable... not the motherboard. Change the RAM to 83%... reboot... change the vcore to 1.75... reboot... change the FSB to 200... reboot. Check for stability, if it runs fine, reduce the voltage one incriment at a time until it becomes unstable.
And... he will not be able to use a multiplier for 13.5 because multipliers above 12.5 are NOT unlocked on the A7N8X.
are you sure about that Jeff? Unless what you are talking about depends on the cpu, I have a 2700+ and the A7N8X dlx mobo and default mult I believe is 13 or 13.5 and I have it running 166 x 14.5 right now. My machine was extremely unstable @ 15 but I'm unwilling to up the voltage at this time so I believe it's due to that.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.