Is there anyway to change voltage on the ecs kt600-a???

[AMDgood IntelBAD]

basically i've got this little sempron 2400 that is rather fun to overclock, but it wont go any higher than ~2110Mhz (201*10.5) without it being unstable. My vCore is only like 1.5v and my temp hit 41°C peak, so i feel confident if i increased vCore that my stability would be high enough to go further into. But my bios is on my ecs/elitegroup kt600-a has no spot for me to increase voltage but it will increase voltage because i put a thunderbird in the socket 462 zif and it gave out like 1.78v. so is there someway i could trick the motherboard or something so i can change voltage?

 

[imported_whatever]

There are pin mods that you can do if you are willing to either solder wires to the back of the socket or put tiny wires in the socket.

 

[AMDgood IntelBAD]

ya id be willing to do both, where are the details on this?

 

[imported_whatever]

http://www.ocinside.de/go_e.html?/html/workshop/pinmod/amd_pinmod.html
just google athlon vcore pin mod
edit: obviously this will void warranty etc, and make sure that however you connect those pins does not end up connecting any others, as it can kill your mobo (happened to me when i bought a machine from a friend that had one and didnt realize it)

 

[AMDgood IntelBAD]

so do semprons follow most thouroughbred athlon rules??

 

[imported_whatever]

Originally posted by: AMDgood IntelBAD
so do semprons follow most thouroughbred athlon rules??

yep

 

[Brian23]

I have the same board, and I did that mod. It works fine except if you ever change processors you need to undo the mod first or you might end up putting 1.85 volts on the chip.

 

[AMDgood IntelBAD]

whats safe on a sempron 2400? i was think maybe 1.775???? does it matter your vCore as long as its cool?

 

[AMDgood IntelBAD]

well, i just say a cpu-z screenshot of one at 1.776v so im going to do it, its gonna be pretty crazy. Can he break 2.3Ghz??? stay tuned to find out on the next episode of the adventures of sempronman and oclad

 

[dug777]

my tbred-b (i assume thats what your sempron core is...) is very happy at 1.775v

 

[AMDgood IntelBAD]

my tbred is also very happy at 1.775v and 2.22Ghz!!!!!!!!!! yyyyyyyyyyeeeeeeeeeaaaaaaaaahhhhh and it only hit 51C during prime95, i think i might touch the 1.8v should i dare? if its not overheating i dont see why though? anybody else i need agreements too