Installed 2nd 512mb stick

[techwanabe]

I installed a 2nd 512 mb stick of PC3200 memory on my Epox 8RDA+ mother board, but in the bios and under my computer/general tab, it only shows 512 mb. I installed the 2nd stick in the closest memory slot to the existing stick.

Any idea why I only show 512 with two 512 sticks installed?

 

[Megatomic]

You should install that stick of RAM in the third slot for dual channel memory mode. Try that and see what happens.

 

[techwanabe]

Originally posted by: Megatomic
You should install that stick of RAM in the third slot for dual channel memory mode. Try that and see what happens.

I'll give it a try...

I've installed lots o SDR type memory and it didn't matter what slot. I don't have any experience with dual channel mem installations so far, and this is the first time I added mem to this mobo. I suppose I could've dug out the manual eh! 😱

 

[2Xtreme21]

Yeah, dual channel should be seated in 1 and 3.

 

[techwanabe]

Hmm...

That did it. I'm registering 1 gb now.

So, you fill mem slots 1, then 3, then 2? Thats logical 😛

 

[Megatomic]

If you want to populate all three slots (why would you?), put 2x256MB in 1 and 2, and put a 512MB stick in slot 3. Or some variation based on that pattern. NF dual channel mode works best with equivalent RAM sizes in each channel.

 

[techwanabe]

Originally posted by: Megatomic
If you want to populate all three slots (why would you?), put 2x256MB in 1 and 2, and put a 512MB stick in slot 3. Or some variation based on that pattern. NF dual channel mode works best with equivalent RAM sizes in each channel.

So if I eventually wanted 2 GB in that machine, I should put my current two 512 mb sticks in slot 1 and 2, and a 1 Gb stick in slot 3?

 

[Megatomic]

That's the way you'd do it if you didn't want to buy 2x1GB sticks. Yes indeed.