InCD 3.2

[Ribbit]

I just downloaded InCD 3.2 (I believe) from Nero. Previsouly, following an upgrade to Windows 2000 I could not load InCd as it was not compatible with 2000. 3.2 apparently is. Anyway-once I installed 3.2 I lost both my CDROM and CDRW drives. Device Mgr. shows the dreaded yellow exclamation points next to each drive. The message device mgr. gives me is "Windows cannot load the drivers required for this devise (Code 31)". Running the troubleshooter indicates "this device depends on another device that is not functioning properly". I have uninstalled InCD 3.2 and both drives. Once reinstalled (just the drives)-same thing. Any ideas?

 

[Basie]

This has happened to me before so I saved the solution for a rainy day.

yes, remove the upper and lower filters from these registry keys:
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
They're usually in the last one.

 

[Ribbit]

Basie

Thanks for the reply, but its easy for you to say What exactly is the procedure for removing the upper and lower filters? Also, I noticed that device manager now recognizes my CDRW as "TDK CDRW121032 SCSI CdRom Device". I do not know if this differs with what it recognized it as prior to my problems. However, my CDRW is definitely not a SCSI device.

Thanks again

 

[Ribbit]

Just another tidbit. I tried to run TDK's firmware upgrade that actually came with the unit when I got it. Lo and behold it doesn't recognize the drive.

 

[Ribbit]

Basie
What can I say? You be da man. That hi/lo filter thing did the trick. I'm not even going to ask how you discovered such an arcane piece of info. If you happen to live in the So. Calif. area I will definitely treat you to lunch.