Importance of a good Power Supply with 9700Pro

Vonkhan

Diamond Member
Feb 27, 2003
8,198
0
71
Well peeps, here's what I learnt:

I was using a Raidmax 350w PS, which is the minimum reccomended. However, Raven Shield locked within the first few minutes and RtCW multiplayer was unstable. I also noticed like "dead pixels" appearing during the Troll's Lair test in 3dMark01 and some artifacing. At first I thought it must be because I didnt reboot the computer before running the test but even after reboots, I got the same thing. In any case, my score was 4675 ... with cold cathodes turned off (yes, does have a relevance!)

Then I installed a Antec 400w PS, a good company and a decent PS unit. No more dead pixels or artifacing in 3dmark01 ... and the score was 4685! Then I turned off the cold cathodes (2 bright blue ones) and the score jumped to 4691. I then disconnected a hard drive that I had hooked up to the same power line as the 9700Pro, in effect giving the 9700Pro its own, unshared power connector ... and the score was 4697!

:D

Working on tweaking my system to get a better score ... why, I dont know :confused: until I get something better to do, i guess!

Specs:

P4 2.8Ghz
ATi 9700Pro
1GB Crucial PC2700
ECS L4S8A2 mobo
Western Digital 160GB w/ 8MB buffer
Seagate 40GB
LG 48x24x48 CD-RW/DVD
Turtle Beach Santa Cruz 5.1
ATi TV Wonder VE

Cooling:
2 x 80mm side Exhaust
1 x 60mm rear Exhaust
1 x 80mm front Intake
AVC Sunflower heatsink/fan
Vantec Nexus Fan controller/temp monitor
 

kevman

Diamond Member
Apr 20, 2001
3,548
1
81
do you have any 3d mark 2001 se scores?

my set up on 3d marke 2003 yileded socres in the 2500 range

CPU p4 1.6a overclocked to 2.2
Crucial 512 pc2100
ATI AIW 9700 Pro
SB Live sound card
2 Maxtor 120 's cofigured to RAID 0
Raid controller card
60 Gig Maxter and 40 Gig maxtor connected to to onboard IDE
NIC
Asus p4b266 Mobo.
Antec True PS 480 Watts

I don't know if thsi is good or bad based on my system specs

my 2001 scores were