IMPERIAL GL-VE motherboard startup problem

[GEOrifle]

I have EMACHINE T1840 with IMPERIAL GL-VE motherboard, by an acsident CPU fan's
wire was broken, i solwed problem by soldering it agaen but sustem still detects
"damaged" cpu fan and shutings down PC. I tryed clear cmos, reset from battery, even
replaced fan by anothers but problem still aquires. i don't know what to do more.
can someone help me please?
Thanks.

 

[stevty2889]

Did the fan you replaced it with have 2 wires or 3 wires? 2 wire fans don't have RPM monitoring, and that is what the BIOS looks for, or if the new fan ran at a lower RPM than the original fan, it might say the same thing..

 

[GEOrifle]

i did with matchin ones, but also by original(it works fine, tryed on another system).

 

[GEOrifle]

It's damaged MOB? For garbage?

 

[GEOrifle]

????

 

[GEOrifle]

I don't belive it, noone knows?

 

[amdskip]

It sounds like your computer cannot detect the fan spinning at a good enough rpm. I just replaced a fan in a computer that the fan still worked fine but the rpm monitoring died. There was no way to disable it in the bios so I bought a new fan and it works great now. There are 3 wires, 2 power and 1 for rpm.

 

[GEOrifle]

thanks, it's means just the running fan isn't enough, RPM-which color, it has RED,yelow
and black.