I'm confused! (very stupid question)

[ku]

You can see my setup on my signiature below. My question is, in the BIOS, i set the multiplier to 15 and FSB to 133 and FSB/DRAM divider to 4/6. Is that the correct "default" setting?

 

[Megatomic]

Sounds right. The default FSB of the mobile chips is 133MHz, a mult of 15 would give you ~2GHz. Yeah. Now, do you plan to overclock or run the chip at a higher FSB? I'd recommend selecting User Default in Softmenu and setting your FSB to 200MHz and your FSB/DRAM ratio to 6/6. You might wanna drop your mult. to 11 (gives you a 3200+). Of course you could always select 3200+ in Softmenu rather than set the FSB and mult. manually.

 

[ku]

Thanks for the info. I'm not planning to do any overclocking just yet =P... but I'll keep that in mind