First off.... ViRGE, thanks for "noticing".. didn't want you to think I was ignoring you. 
And thanks Russ, for letting me pimp your 875MHz thread to figure out some stuff.
OK, I've got three of my five systems (4 processors) back up and cracking.... Hopefully, I'll get the other two up soon.... time thing you know...
I just ordered three PIII 700MHz cB0 procs that will boost my contribution soon.... Three more to come soon, as soon as I verify that ALL of my boards will run them.. and O/C of course.
All five systems will be connected via my HP 100Mbit managed hub (7 spare ports after..... hint, hint....
)
I am ordering a CYBEX KVM on Monday to connect 4 of the 5 together for keyboard, mouse, and video sharing.... (each sys has its own purpose).
So right now, I've got a dual 450, single 450, and a single 558 going again. Within a week, i should up that to dual 450, single 931, single 931, single 931, single 504....
Utimately, with my current boards, some luck, and maybe some new memory, I should get it to:
Dual 784 (maybe more), and 4 each single 931s....
So, you SHOULD see my numbers start to climb in the stats again.....
BTW, Russ et al.... Upgrading the BIOS in my Tiger 100 Rev B fixed the O/C warning message AND gave me the 133 bus setting (probably won't get it to post at this though... probably only 112)
The new BX6r2 bios upgrade will get me going on all CuMines....
yee-haaaa!
AND believe it or not, new BIOS upgrades on my P2B-S and my two P2B-Bs will allow Cu-Mines as well....
Funny, the P2B-Bs will actually be much better overclockers than the P2B-S.... not bad for transition AT motherboards....
Sorry I was gone so long....
Go TA!!!
And thanks Russ, for letting me pimp your 875MHz thread to figure out some stuff.
OK, I've got three of my five systems (4 processors) back up and cracking.... Hopefully, I'll get the other two up soon.... time thing you know...
I just ordered three PIII 700MHz cB0 procs that will boost my contribution soon.... Three more to come soon, as soon as I verify that ALL of my boards will run them.. and O/C of course.
All five systems will be connected via my HP 100Mbit managed hub (7 spare ports after..... hint, hint....
I am ordering a CYBEX KVM on Monday to connect 4 of the 5 together for keyboard, mouse, and video sharing.... (each sys has its own purpose).
So right now, I've got a dual 450, single 450, and a single 558 going again. Within a week, i should up that to dual 450, single 931, single 931, single 931, single 504....
Utimately, with my current boards, some luck, and maybe some new memory, I should get it to:
Dual 784 (maybe more), and 4 each single 931s....
So, you SHOULD see my numbers start to climb in the stats again.....
BTW, Russ et al.... Upgrading the BIOS in my Tiger 100 Rev B fixed the O/C warning message AND gave me the 133 bus setting (probably won't get it to post at this though... probably only 112)
The new BX6r2 bios upgrade will get me going on all CuMines....
AND believe it or not, new BIOS upgrades on my P2B-S and my two P2B-Bs will allow Cu-Mines as well....
Funny, the P2B-Bs will actually be much better overclockers than the P2B-S.... not bad for transition AT motherboards....
Sorry I was gone so long....
Go TA!!!