I'm about ready to give up..

Toggle sidebar Toggle sidebar
P

Pathogen03

Golden Member
May 16, 2004
1,056
0
0
I am at a loss, can someone please help me troubleshoot my computer.. my thread in Technical support has been ignored for about 2 days now, and im at a loss as more and more problems keep developing, being solved, and spawning new ones.


Right now im at a point where NTLDR isnt found so windows cant start, yet the windows recovery CD says "inspecting hardware configuration" then spins down and leaves me at a black screen...

If anyone can at least try to help me, can you IM me some sort of IM or MSN contact, or anything I can talk with you in real-time with.. I just purchased a new hard drive/video card, and need to know if that was a mistake, and if its the motherboard or processor thats fscked... Thanks..
 
So

So

Lifer
Jul 2, 2001
25,923
17
81
Definietly needs to be melted for scrap...

OT != place to ask for help.
 
P

Pathogen03

Golden Member
May 16, 2004
1,056
0
0
tried that (the boot from HD first), but it says ntldr is missing, tried to boot from CD first and windows CD hands.
 
P

Pathogen03

Golden Member
May 16, 2004
1,056
0
0
this computer has a 20 gig harddrive, cant save much, but I CANT EVEN REINSTALL WINDOWS as the windows CD wont load.. It did earlier today and yesterday, but stopped when I swapped video cards...


only have one hard drive by the way.
 
P

Pathogen03

Golden Member
May 16, 2004
1,056
0
0
Originally posted by: nakedfrog
What happens when you put the old video card back in?
Click to expand...

here is the deal..

PC was crashing with Radeon 9600 Pro

so I tried to swap a Ti4200 128mb in to check if the video card was the problem

windows corrupted and said system32/system folder couldnt be found, so I had to repair windows through a prompt to be able to boot, and it crashed uncontrollably on the Ti4200, so I switched back to the 9600 Pro

now it says ntldr cant be found, windows wont boot, and I cant even get the recovery console to work..



Could this just be a hard drive problem, or might it be motherboard?

What components would this be..

 
B

Billzie7718

Senior member
Sep 2, 2005
649
0
0
Sounds like your hard drive may not be recognized in BIOS. Check the jumper settings on the back and make sure it is set to master. NTLDR is an error that says it cant find the operating system. Everything else in your computer should be fine (as shown by being able to boot to the XP cd). Just the hard drive you need to worry about.
 
P

Pathogen03

Golden Member
May 16, 2004
1,056
0
0
Originally posted by: SampSon
Originally posted by: Pathogen03
I cant get to any sort of prompt to be able to fdisk.
Click to expand...
Use a boot disk.
Click to expand...

As ive mentioned, the windows XP boot CD says "reading system configuration" then black screens and spins down.
 
P

Pathogen03

Golden Member
May 16, 2004
1,056
0
0
Originally posted by: Billzie7718
Sounds like your hard drive may not be recognized in BIOS. Check the jumper settings on the back and make sure it is set to master. NTLDR is an error that says it cant find the operating system. Everything else in your computer should be fine (as shown by being able to boot to the XP cd). Just the hard drive you need to worry about.
Click to expand...

I CANT boot to the XP CD... it blackscreens and spins down.

I used to be able to earlier today... not anymore.


I know what an NTLDR error is and how to fix it, the issue is I cant access the recovery CD, my computer crashed insanely when it was up, and im trying to figure out what component is the culprit so I can replace it...
 

Originally posted by: Pathogen03
Originally posted by: SampSon
Originally posted by: Pathogen03
I cant get to any sort of prompt to be able to fdisk.
Click to expand...
Use a boot disk.
Click to expand...

As ive mentioned, the windows XP boot CD says "reading system configuration" then black screens and spins down.
Click to expand...
No, not a cd, a disk. You know, a floppy?
 
B

Billzie7718

Senior member
Sep 2, 2005
649
0
0
Originally posted by: Pathogen03
Originally posted by: Billzie7718
Sounds like your hard drive may not be recognized in BIOS. Check the jumper settings on the back and make sure it is set to master. NTLDR is an error that says it cant find the operating system. Everything else in your computer should be fine (as shown by being able to boot to the XP cd). Just the hard drive you need to worry about.
Click to expand...

I CANT boot to the XP CD... it blackscreens and spins down.

I used to be able to earlier today... not anymore.


I know what an NTLDR error is and how to fix it, the issue is I cant access the recovery CD, my computer crashed insanely when it was up, and im trying to figure out what component is the culprit so I can replace it...
Click to expand...

Does it come up and say " Inspecting your hardware config?"
 
P

Pathogen03

Golden Member
May 16, 2004
1,056
0
0
Originally posted by: Billzie7718
Originally posted by: Pathogen03
Originally posted by: Billzie7718
Sounds like your hard drive may not be recognized in BIOS. Check the jumper settings on the back and make sure it is set to master. NTLDR is an error that says it cant find the operating system. Everything else in your computer should be fine (as shown by being able to boot to the XP cd). Just the hard drive you need to worry about.
Click to expand...

I CANT boot to the XP CD... it blackscreens and spins down.

I used to be able to earlier today... not anymore.


I know what an NTLDR error is and how to fix it, the issue is I cant access the recovery CD, my computer crashed insanely when it was up, and im trying to figure out what component is the culprit so I can replace it...
Click to expand...

Does it come up and say " Inspecting your hardware config?"
Click to expand...



It says that then blackscreens and spins down..
 
Phoenix86

Phoenix86

Lifer
May 21, 2003
14,644
10
81
The error (missing NTLDR) is caused by corruption on the HDD/partition/boot record.

Not being able to boot to a windows CD indicates hardware failure of the mobo/cpu/memory, or a bad disk/drive/IDE cable.

Run memtest86+ from www.memtest.com for several hours, or until it generates errors. Any errors=fail. The test won't stop until you stop it (turn the PC off).

The video card is not causing the problem.
 
P

Pathogen03

Golden Member
May 16, 2004
1,056
0
0
tried swapping IDE cable.



Thing is, before this hard drive crap began, it was freezing on any video benchmark or any 3d game, so I was assuming the video card had gone bad..

I have an order for more money than I can afford on newegg that was just shipped for a hard drive and a video card.. I had the PC working last night for a few hours after doing a fix for the registry becoming corrupt, and even then any graphics crashed the PC..

could this be a cpu/motherboard problem? Ive allready memtested the ram and prime'd the CPU though.. so im tempted to blame the motherboard, and would the CPU or Mobo problem manifest itself through the 3d game errors as well or ?
 
nakedfrog

nakedfrog

No Lifer
Apr 3, 2001
62,491
18,518
136
Yeah, I'm betting it's a memory problem. Isolate the memory sticks one by one. You might try just reseating them first, though.
 
B

Billzie7718

Senior member
Sep 2, 2005
649
0
0
Originally posted by: Phoenix86
The error (missing NTLDR) is caused by corruption on the HDD/partition/boot record.

Not being able to boot to a windows CD indicates hardware failure of the mobo/cpu/memory, or a bad disk/drive/IDE cable.

Run memtest86+ from www.memtest.com for several hours, or until it generates errors. Any errors=fail. The test won't stop until you stop it (turn the PC off).

The video card is not causing the problem.
Click to expand...

it spins down because there is probably a problem with your hard drive. Check in BIOS to make sure it recognizes it properly ie. 20gig. Reseat the cables, remove all anything other than hard drive from one cable. CD Rom on the other.
 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom