If you're familiar with Shuttle Ultra AN35

[FXGuy3369]

I have a shuttle ultra AN35 Motherboard and an XP2600+ processor, I bought this board because I heard it was easy to overclock and I wanted to try it out. Well so far I can not get it to even normal clock. I have a stick of Rosewill (I know cheap stuff) 512MB PC3200 RAM, and when the computer boots it reads AMS 1250MHz processor. I have tried all different types of setup in the bios and it either still reads that slow or it doesnt boot. What should my bios chipset settings be at????

 

[AtlantaBob]

This is just a preliminary guess, and I haven't thought it through, but could it be that the FSB is set to 100 MHz rather than 133 MHz?

If that doesn't help, consider it a free bump. Good luck...

P.S. Also, just to be sure, can you check the RAM in another computer (the one you're posting on for instance?)

 

[nick1985]

set your front side bus to 166

 

[FXGuy3369]

I set the FSB to 166 it boots and says 1250MHz

 

[mechBgon]

Full specs please, including brand/model of power supply. Is the 2600+ a mobile or standard chip?

 

[nick1985]

if your FSB is at 166, then what is your multiplier setting?

 

[MercenaryForHire]

Update your BIOS.

- M4H

 

[FreshFish]

Originally posted by: MercenaryForHire
Update your BIOS.

- M4H

ditto

 

[FXGuy3369]

I am pretty new and have built several machines but never updated a BIOS how do I got about doing that?

 

[Jeff7]

Go here. Read the instructions at the bottom of the page.

Then, click on the link for the exact motherboard you have. If you flash the wrong BIOS, your system will be unbootable.