- May 24, 2005
- 6,390
- 469
- 126
Computer in the sig.
According to eVGA Precision my GPU1 temp is 52C and GPU2 temp is 46C at idle with the fan speed at 29.
Now I typically will turn up the fan speed to around 50 when gaming.
What I've noticed:
Settings at 1080p Very High/Maximum Settings.
After heavy gaming (Crysis, Warmonger) for about 15mins.
GPU1 temp is about 85C-90C, GPU2 temp is about 75C-80C
Reload and turn on 8xAA
GPU1 temp hits 95-98C, GPU2 temp is about 80-85C.
Reload and turn on 16Q AA, 16x AF
GPU temp hits 100-105C, GPU2 temp is about 80-85C.
This is insane!
Two Questions:
1) Is it just due to more work that has to be done that the temps are shooting up so high?
2) Is there anything strange about the load temps vs idle, or is this just due to to the overclocked cards? (my temps are essentially doubling during gaming with with double the fan speed).
I'm running in a large case (Coolermaster Cosmos) with good airflow and the cards are separated by 2 slots. I would say the ambient temperature is typically around 65F (18C).
Now I certainly could just set Precision tuner to auto-fan speed and on full load it will run around 80C for GPU1 and 70C for GPU2, but it would default to 100% fan speed during gaming and that's just ridiculously irritating. Even if I applied Dynamat Extreme & Dynaliner (the case already has some acoustic foam built-in) I'm pretty sure there's absolutely no way of shutting up most of that fan noise.
Think I should just man up and use headphones, or is there something better I can do? Additionally, anyone think my temps are odd?
According to eVGA Precision my GPU1 temp is 52C and GPU2 temp is 46C at idle with the fan speed at 29.
Now I typically will turn up the fan speed to around 50 when gaming.
What I've noticed:
Settings at 1080p Very High/Maximum Settings.
After heavy gaming (Crysis, Warmonger) for about 15mins.
GPU1 temp is about 85C-90C, GPU2 temp is about 75C-80C
Reload and turn on 8xAA
GPU1 temp hits 95-98C, GPU2 temp is about 80-85C.
Reload and turn on 16Q AA, 16x AF
GPU temp hits 100-105C, GPU2 temp is about 80-85C.
This is insane!
Two Questions:
1) Is it just due to more work that has to be done that the temps are shooting up so high?
2) Is there anything strange about the load temps vs idle, or is this just due to to the overclocked cards? (my temps are essentially doubling during gaming with with double the fan speed).
I'm running in a large case (Coolermaster Cosmos) with good airflow and the cards are separated by 2 slots. I would say the ambient temperature is typically around 65F (18C).
Now I certainly could just set Precision tuner to auto-fan speed and on full load it will run around 80C for GPU1 and 70C for GPU2, but it would default to 100% fan speed during gaming and that's just ridiculously irritating. Even if I applied Dynamat Extreme & Dynaliner (the case already has some acoustic foam built-in) I'm pretty sure there's absolutely no way of shutting up most of that fan noise.
Think I should just man up and use headphones, or is there something better I can do? Additionally, anyone think my temps are odd?
