ich5r sata raid problem (ga-8ik1100)

[PAP123]

> I have problem with on board Intel ICH5R Raid Contreller. I have conected
> two S-ATA discs Seagate Barracuda 7200RPM, 8MB cache and capacity 80GB
> (160GB in RAID0 mode). All is OK, but when I restart my system, RAID cant
> find connected discs. I must turn off computer and then turn on, and all
> is OK again. Where is problem? Thanks for your help.
>
> Configuration:
> MB GigaByte 8IK1100, Pentium4 2600MHz (800FSB), 2x 512MB DDR TwinMOS
> (400MHz), VGA PowerColor Radeon 9500, 2x S-ATA Discs Seagate ST380013AS
> connected to on board Intel ICH5R in RAID0 mode.

 

[grapetoy]

I too have the same problem. However I only have one SATA Seagate Barracuda 7200, 8MB cache and 120GB capacity. I was going to purchase another identical HD, thinking the RAID function was pissed because I only had one drive hooked up. I am glad I have read this and didn't spend another $200. Any help for me and PAP123 would be greatly appreciated. I have contacted Gigabyte, they told me that I was the 1st one to have this problem. So PAP123 give them a call at 626-854-9338 ext. 216 the guys name is Leo Wang. Lets light a fire under some Gigabyte butt!!!

Thanks to all

Grapetoy

Originally posted by: PAP123
> I have problem with on board Intel ICH5R Raid Contreller. I have conected
> two S-ATA discs Seagate Barracuda 7200RPM, 8MB cache and capacity 80GB
> (160GB in RAID0 mode). All is OK, but when I restart my system, RAID cant
> find connected discs. I must turn off computer and then turn on, and all
> is OK again. Where is problem? Thanks for your help.
>
> Configuration:
> MB GigaByte 8IK1100, Pentium4 2600MHz (800FSB), 2x 512MB DDR TwinMOS
> (400MHz), VGA PowerColor Radeon 9500, 2x S-ATA Discs Seagate ST380013AS
> connected to on board Intel ICH5R in RAID0 mode.

:evil: