i5-3450 temperature 78c

[tarek92]

hi guys
i have just bought an i5 3450

when the turbo boost is enabled it can reach to 3.5 ghz

on idle i get 36-40c
using prime95 for 3 min or 5 ..the temp reach 78c-80c

is this a high temp or its normal ?


and another qus :d.....when i have benchmarked it with 3dmark vangte i get a cpu score 17714
is it oky ?

sorry for my bad english :biggrin:

 

[Kenmitch]

Welcome to the forum 🙂

Using stock cooler? Temps look fine if so. Just make sure its seated good.

 

[ShintaiDK]

Looks perfectly normal with stock cooler.

 

[tarek92]

thx guys .....yea its the stock cooler

i have just thought that these temp are high,,,,maybe later i will get a better cooler

and for the benchmarks i have post ? any ideas

 

[ShintaiDK]

thx guys .....yea its the stock cooler

i have just thought that these temp are high,,,,maybe later i will get a better cooler

and for the benchmarks i have post ? any ideas

The CPU is rated to run up to 105C. My 3570K hits 80-85C with Linpack. Stock cooler as well.

Better cooler wont do anything for you. It doesnt matter if the CPU runs at 40C or 80C.

 

[tarek92]

The CPU is rated to run up to 105C. My 3570K hits 80-85C with Linpack. Stock cooler as well.

Better cooler wont do anything for you. It doesnt matter if the CPU runs at 40C or 80C.

good to hear so 🙂.....

i have benchmarked my cpu with 3d mark vantge and i got 17714

is it oky ?

 

[tarek92]

hmmm this seams wired.....when i set the core clocks to 35 it should be 3.5ghz
in load
when i use prime95 the maximum core clock is 3.3 ghz not 3.5
any ideas ?

 

[ShintaiDK]

hmmm this seams wired.....when i set the core clocks to 35 it should be 3.5ghz
in load
when i use prime95 the maximum core clock is 3.3 ghz not 3.5
any ideas ?

The 3450 is a 3.1Ghz chip with max turbo of 3.5Ghz. Turbo is default 4/3/2/2. meaning with 4 threads you get (up to) 3.3Ghz. Only 1 thread gives 3.5Ghz.

 

[tarek92]

The 3450 is a 3.1Ghz chip with max turbo of 3.5Ghz. Turbo is default 4/3/2/2. meaning with 4 threads you get (up to) 3.3Ghz. Only 1 thread gives 3.5Ghz.

i didnt know that ...anyway thx for the help man