• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

I will paypal someone $6 if you can find me this driver.

E

Epoman

Platinum Member
It's for a Orange Micro USB2.0 Cardbus I need the driver for XP
I have it working but it is running at only USB1.0 speed. I reinstalled and I lost the driver. And the company is out of business so I can't contact them.

Link

My device manager settings

EDIT

We fiqured out it's not the driver because.
I am getting 3mb/s so it's 2.0 it's just not at its full potential
 
you running sp2?
Basic trouble shooting tips for USB 2.0 cardbus installation.
a) Listing under "Device Manager" was different from manual.
- Universal Serial Bus Controllers
- Intel(r) 82371AB/EB PCI to USB Universal Host Controller
- NEC PCI to USB Open Host Controller
- NEC PCI to USB Open Host Controller
- USB Root Hub
- USB Root Hub
- USB Root Hub
- Universal Serial Bus Controllers
- NEC PCI to USB Enhanced Host Controller
- USB 2.0 Root Hub Device

Is it correct? Yes, the new orange micro driver is like this. They have split the USB 2.0 and USB 1.1 driver into two parts.

b) After removing our cardbus, the listing under "Device Manager" was back to original.
- Universal Serial Bus Controllers
- Intel(r) 82371AB/EB PCI to USB Universal Host Controller
- USB Root Hub

Is it normal? Yes, the entire NEC driver should be gone!

c) Error occurred while reinserting our cardbus, the listing had a "!".
- Universal Serial Bus Controllers
- Intel(r) 82371AB/EB PCI to USB Universal Host Controller
- NEC PCI to USB Open Host Controller
- NEC PCI to USB Open Host Controller
- USB Root Hub
- USB Root Hub
- USB Root Hub
- Universal Serial Bus Controllers
! NEC PCI to USB Enhanced Host Controller

It did not show "USB 2.0 Root Hub Device". What happened to USB2.0 capability? If you have an exclamation mark next to the NEC PCI to USB Enhanced Host Controller, the driver is not working so the cardbus can run on USB 1.1 mode only.
Click to expand...

haha it says nothing about fixing it back to 2.0


google search shows that O-M went out of business

maybe sp1 has bad drivers? try this link
 
Originally posted by: Jon855
First make sure you do have 2.0 USB port
Click to expand...

Yes that's what this card does it's a cardbus for USB2.0 it has 4 ports. it's running 1.0 speed. I need it to run 2.0 speed. It use too until I reinstalled.
 
Originally posted by: AkumaX
you running sp2?
Basic trouble shooting tips for USB 2.0 cardbus installation.
a) Listing under "Device Manager" was different from manual.
- Universal Serial Bus Controllers
- Intel(r) 82371AB/EB PCI to USB Universal Host Controller
- NEC PCI to USB Open Host Controller
- NEC PCI to USB Open Host Controller
- USB Root Hub
- USB Root Hub
- USB Root Hub
- Universal Serial Bus Controllers
- NEC PCI to USB Enhanced Host Controller
- USB 2.0 Root Hub Device

Is it correct? Yes, the new orange micro driver is like this. They have split the USB 2.0 and USB 1.1 driver into two parts.

b) After removing our cardbus, the listing under "Device Manager" was back to original.
- Universal Serial Bus Controllers
- Intel(r) 82371AB/EB PCI to USB Universal Host Controller
- USB Root Hub

Is it normal? Yes, the entire NEC driver should be gone!

c) Error occurred while reinserting our cardbus, the listing had a "!".
- Universal Serial Bus Controllers
- Intel(r) 82371AB/EB PCI to USB Universal Host Controller
- NEC PCI to USB Open Host Controller
- NEC PCI to USB Open Host Controller
- USB Root Hub
- USB Root Hub
- USB Root Hub
- Universal Serial Bus Controllers
! NEC PCI to USB Enhanced Host Controller

It did not show "USB 2.0 Root Hub Device". What happened to USB2.0 capability? If you have an exclamation mark next to the NEC PCI to USB Enhanced Host Controller, the driver is not working so the cardbus can run on USB 1.1 mode only.
Click to expand...

haha it says nothing about fixing it back to 2.0


google search shows that O-M went out of business

maybe sp1 has bad drivers? try this link
Click to expand...

I have all that listed except whats in the BOLD.
 
Originally posted by: ThisIsMatt
http://www.syba.com/bin/nec/upd720101/upd720101_drv_winall_v2.1.10.zip
Click to expand...

Well I installed that but nothing changed. I have 2 external HD's and a new NEC 16x DVD burner and when I use nero speed test, it's showing only 6x on average throughout the test. So it must be USB1.1 Plus it took me 15 minutes to burn a DVD using 8X media and I had Nero set to maximum speed. So that also tells me I'm only at 1.1 USB
 
Ok here's a question for you guys. If I can transfer a 90MB file from one external HD to another external HD in under 30 seconds is that USB2.0 speeds?
 
Ok here's a question for you guys. If I can transfer a 90MB file from one external HD to another external HD in under 30 seconds is that USB2.0 speeds?
Click to expand...
yeah, do I get the 6 bucks.
 
Originally posted by: Epoman
Ok here's a question for you guys. If I can transfer a 90MB file from one external HD to another external HD in under 30 seconds is that USB2.0 speeds?
Click to expand...

3MB/sec, so yes it's USB 2.0, but definitely not as fast as it can go.
 
Originally posted by: Epoman
It's for a Orange Micro USB2.0 Cardbus I need the driver for XP
I have it working but it is running at only USB1.0 speed. I reinstalled and I lost the driver. And the company is out of business so I can't contact them.

Link

My device manager settings
Click to expand...

😕 Standard cardbus is supported by XP automatically. I'm suprised this isn't automatically installed when you plug it in.
 
You must log in or register to reply here.
Back
Top