I need Bios help

[EncodedBites]

Ok CPU Clock Ratio [x15] at 3.01GHz I would like to get it a little higher
I have Windows Visa Ultimate 64-bit Service Pack 2 and it would restart my pc at random times but i just changed my ram Voltage from [Auto] to [+0.150] 1.950V and it has bin a LOT more stable but not 100% I would like some help setting up my bios to try to stabilize my pc
heres some of my pc's specs.

Thermaltake Toughpower 750W Main Features
Up to 750 Watts continuous output power
ATX 12V 2.2 and EPS 12V compliant
140mm cooling fan with auto fan speed control for quiet operation
Tight voltage regulation (±3%)
High efficiency (83%) and Active PFC
Quad +12V outputs (up to 60A)
info http://www.pcper.com/article.php?aid=266

Motherboard GA-MA790X-DS4 AMD 790X + SB600 Chipset
info http://www.gigabyte.com.tw/Sup...el.aspx?ProductID=2695

CPU AMD Athlon Dual-Core Kuma 7750 Black Edition Socket AM2+ (940)

ATI Radeon HD 4850 Over Clocked from HIS the Ice Q4 Turbo X 685MHz 2.2GHz Memory Clock
Idel Temp 43c Lode 56c to 58c fan speed set to 65%

OCZ Reaper HPC heat pipe conduit DDR2 800 4GB 2.2v
--------------------------------------------------------------
Windows Visa Ultimate 64-bit Service Pack 2

Windows Experience Index 5.7

Processor - 5.7 I would like to get it up to 5.9

Memory (RAM) 4.00 GB - 5.9

Graphics ATI Radeon HD 4800 Series - 5.9

Gaming graphics 2303 MB Total available graphics memory - 5.9

Primary hard disk 116GB Free (149GB Total) - 5.9
--------------------------------------------------------------
Bios Setting
CPU Clock Ratio [x15] it has [x15.5] [x16] [x16.5] [x17] >
CPU NorthBridge Freq [Auto] it has [x5] [x6] [x7] [x8] [x9] [x10] >
Memory Controller Volt [Auto] it has [-0.0125][-0.0250][-0.0375][-0.0500][-0.0625][-0.0750] >
CPU Host Clock Control [Auto] it has [Manual]

In Blue x CPU Frequency (MHz) 200

PCIE Clock (MHz) [100] >
HT Link Frequency [Auto] it has [200MHz][400MHz][600MHz][1GHz][1.2GHz][1.4GHz] >
Set Memory Clock [Manual] it has [Auto]
Memory Clock [x4.00] 800Mhz it has [5.33] 1066Mhz

In Blue x EPP Mode - Disabled
In Blue x EPP Voltage Control - Normal

DRAM COnfiguration [Press Enter]
******** System Voltage Optimized ********
System Voltage Control [Manual] it has [Auto]
CPU Voltage Control [Normal] it has [+0.025][+0.050][+0.075][+0.100][+0.125][+0.150] >

In Blue x CPU Vcore 1.325V

DDR2 Voltage Control [+0.150] In Blue 1.950V My OCZ Ram says it can go to 2.2V
NorthBridge Voltage Control [Normal] it has [+0.025][+0.050][+0.075][+0.100][+0.125][+0.150] >
SouthBridge Voltage Control [Normal] it has [+0.025][+0.050][+0.075][+0.100][+0.125][+0.150] >

here are some pics of my bios
http://picasaweb.google.com/lh..._birAA?feat=directlink
http://picasaweb.google.com/lh...Hx614A?feat=directlink
http://picasaweb.google.com/lh...7J33Pg?feat=directlink

 

[richierich1212]

I would look at your memory settings. If it says 2.2v I think you need to up the DDR2 voltage to 2.2v.

 

[EncodedBites]

ok thanks ill try that right now
but what i really want is to try to get my CPU up a little higher with out my pc restarting on me 🙁 i dont know if i need to up the CPU Voltage or up my NorthBridge Freq or Voltage im new to overclocking but this is not the first pc i have put together just the first time trying to overclock.

 

[richierich1212]

Well you can't get your CPU higher without knowing what's causing your random crashes. You may want to lower the overclock a bit and then test.

 

[EncodedBites]

ok i set my ram Voltage to 2.0v now and i did stress tests on my ram cpu and video card and it hasn't crashed for about a week i think it was restarting because i was changing Voltages in my bios. ok well what i would like is any info i can get about bios setting to try to get my cpu from x15 to x16 i have ben looking all over the net all i found was people talking about how thay got there AMD Athlon Dual-Core Kuma 7750 Black Edition to x16.5 and x17 but thay dont say what setting thay used to get it up that high i see them say anything past x15 and you have to up the Voltage but thay dont say how high