i found out where some of the OGR is coming from

[toph99]

my online friend who i got cracking RC5 by downloading the RC5 client from ta cube's preconfiged section is doing OGR for some reason, take a look:

[Oct 27 01:16:46 UTC] Input buffers are full (or projects are closed).
No fetch required.
.....10%.....20%....
[Oct 27 03:49:56 UTC] Paused... (user generated)
[Oct 27 05:00:46 UTC] Running again after pause... (user cleared)
.....10%.....20%.....30%.....40%..
[Oct 27 08:03:26 UTC] Paused... ('scandisk' active)
[Oct 27 09:13:00 UTC] Running again after pause... ('scandisk' inactive)
.....10%.....20%.....30%.....40%.....50%.....60%.....70%.....80%.....90%....100
[Oct 27 11:58:00 UTC] Completed OGR stub 25/12-18-6-10-15-4 (66,374,152,349 ...
0.12:00:58.68 - [1,534,354.40 nodes/sec]
[Oct 27 11:58:00 UTC] Loaded OGR stub 25/12-18-6-10-15-7
[Oct 27 11:58:00 UTC] Summary: 1 OGR packet (66.37 Gnodes)
0.12:00:58.68 - [1.53 Mnodes/s]
[Oct 27 11:58:00 UTC] 23 OGR packets (23 work units) remain in buff-in.ogr
[Oct 27 11:58:00 UTC] 1 OGR packet (1 work unit) is in buff-out.ogr
.....10%.....20%.....30%.....40%.....50%.....60%.....70%.....80%.....90%....100
[Oct 27 20:45:40 UTC] Completed OGR stub 25/12-18-6-10-15-7 (64,940,476,895 ...
0.08:43:09.38 - [2,068,867.44 nodes/sec]
[Oct 27 20:45:40 UTC] Loaded OGR stub 25/12-18-6-10-15-8
[Oct 27 20:45:40 UTC] Summary: 2 OGR packets (131.31 Gnodes)
0.20:44:08.06 - [1.75 Mnodes/s]
[Oct 27 20:45:40 UTC] 22 OGR packets (22 work units) remain in buff-in.ogr
[Oct 27 20:45:40 UTC] 2 OGR packets (2 work units) are in buff-out.ogr
.....10%.....20%.

how do i get her to change back to rc5? just through the configure section?


PS
i just got her to update the buffers, this is what it said:
[Oct 28 00:34:55 UTC] Connected to distributed.net 205.149.163.211:2064...
[Oct 28 00:34:55 UTC] The keyserver says: "Happy cracking. Hail Eris!"
[Oct 28 00:34:57 UTC] Retrieved OGR work unit 2 of 2 (100.00% transferred)
[Oct 28 00:34:57 UTC] Output buffers are empty. No flush required.
.....10%.....20%.

 

[Russ]

toph99,

If it's doing OGR, either the ini file got corrupted, or somebody changed it. The disks are configured to disable OGR. Have her check the ini for the following line and make sure it's there:

[misc]
project-priority=RC5,OGR=0,DES=0,CSC=0

Russ, NCNE

 

[DanC]

Take a look at the dnetc.ini file

the section:

[misc]
project-priority=RC5=1,OGR=0,DES=0,CSC=0

should read like that. 🙂

 

[toph99]

for some reason they were all turned on. weird. oh well, it's fixed 🙂