I cut my 1700+ L3's - GOT 2.1Ghz on a KG7!!

[DivideBYZero]

It's running prime like a mofo @45c.

I am a happy camper

I doubt this is all this puppy has either.

Chip is 0308 XPMW DLT3C

 

[maluckey]

Great job! If it's a Tbred B, I'll bet that you'll get higher still. I'm pumpimg 2340 mhz from my 0302 AIUHB 2100+, and I hear that the 1700+ are almost the same as far as OC'ing. What's your FSB and mult. I'm still locked at 13x and 180 mhz FSB and 1/4 divider. I Want to cut/fconect the L11 for voltage, but instead may do a solder on voltage mod. Should be good for another fou mhz FSB, then I'll be forced to cut the L3. That's why I'm interested in your setup.

 

[DivideBYZero]

Originally posted by: maluckey
Great job! If it's a Tbred B, I'll bet that you'll get higher still. I'm pumpimg 2340 mhz from my 0302 AIUHB 2100+, and I hear that the 1700+ are almost the same as far as OC'ing. What's your FSB and mult. I'm still locked at 13x and 180 mhz FSB and 1/4 divider. I Want to cut/fconect the L11 for voltage, but instead may do a solder on voltage mod. Should be good for another fou mhz FSB, then I'll be forced to cut the L3. That's why I'm interested in your setup.

It's definately a Tbred B and it is a top 'Clocker. One on my components is bitching at around 145FSB (I suspect my cheap-ass sound card). Current FSB is 140 with a multi of 15. I can go to 17 if I cut the next L3 up, and this has got much more headroom IMHO. I got 2100 easy late last night.

It booted to 2Ghz by default with no mods except the bridge mod. This was it's first boot!