how to set memory clock speed? is this correct?

JustStarting

Diamond Member
Dec 13, 2000
3,135
0
76
have an abit kt7-raid. how do i set the bios to get memory running at 133 (256mb/pc133/7.5ns/cas2/micron). im not sure this is correct but do i set the dram clock to host+pciclock? if i just set it at host will it only run at 100mhz? how far can i take the fsb on this w/ duron 700 and the following:

abit kt7/raid
duron 700(had it to 950@ 1.8v, waiting for my taisol to keep it there)
30gb quantum ultra66/7200
256mb/pc133/cas2/7.5ns/micron memory
sblive!value- (works w/sb16 emulation disabled)
geforce 32mb annihilator agp
52x cdrom
generic floppy

thanks in advance

 

bogdan

Junior Member
Nov 13, 2000
17
0
0
Yes set the dram clock to host+pciclock. This gives you 133 mhz for your ram.
As to FSB the maximum is around 110mhz. This is a chipset limitation which is partly the reason you are seeing KT133a boards coming out now. They can run 133mhz FSb.

Try here for further Bios options