How to read SMART data from a OCZ SSD?

[Artista]

I used the OCZ software to update my firmware, clear the SSD and used the SMART software suit/tool included to run a test on the OCZ SSD. Anyone know how to interpret the data?

Based on a few threads I have seen around here and other places on the Internet should I junk the drive? It would seem that based on history they have been very unreliable.

SMART Data

Model Number: OCZ-VERTEX2 3.5
Serial Number: OCZ-38P684Q8UW58CE1K
WWN: 5e83a97f954f47c6

ID ATTRIBUTE STATUS VALUE WORST THRESHOLD TYPE UPDATED RAW
1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always 0/0
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always 0
9 Power-On_Hours 0x0032 100 100 000 Old age Always 6765h+27m+17.120s
12 Device_Power_Cycle_Count 0x0032 100 100 000 Old age Always 87
171 Program_Fail_Count 0x0032 000 000 000 Old age Always 0
172 Erase_Fail_Count 0x0032 000 000 000 Old age Always 0
174 Unexpected_Power_Loss 0x0030 000 000 000 Old age Offline 9
177 Wear_Range_Delta 0x0000 000 000 000 Old age Offline 0
181 Program_Fail_Count 0x0032 000 000 000 Old age Always 0
182 Erase_Fail_Count 0x0032 000 000 000 Old age Always 0
187 Reported_Uncorrectable 0x0032 100 100 000 Old age Always 0
194 Temperature_Celsius 0x0022 030 030 000 Old age Always 30 (Min/Max 30/30)
195 ECC_On-the-Fly_Error_Count 0x001c 120 120 000 Old age Offline 0/0
196 Reallocation_Event_Count 0x0033 100 100 000 Pre-fail Always 0
231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always 0
241 Lifetime_Writes_from_Host 0x0032 000 000 000 Old age Always 0
242 Lifetime_Reads_to_Host 0x0032 000 000 000 Old age Always 2368