• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

How to make this beer bong?? Need to find out what the parts are?

F

FFactory0x

Diamond Member
Any one here familiar with plumbing and can give me a headup on what parts would need. Ill prolly hit up homedepot later.

First Pic with nozzles The nozzles can be closed off. What are those parts and the caps?

Also what are these other peices i should ask for and what do i need
eb_1_b.jpg
 
Originally posted by: minendo
Go to a plumbing store and be creative.

My homemade bottle bottle rocks.
Click to expand...
Seriously, go to Home Depot, go to the plumbing aisle and go nuts. PVC splitters and other parts aren't expensive.
 
you have your standard pvc ball valve. a funnel.

the super long T i do not know. you could go to home depot, ask them for a pvc T, then get 2 STREET T's, and then 2 Street 90's

MIKE
 
the caps are to cover up the other openings in case you only want to do a single beer bong. pretty simple. whats not pictured is the long hose that connects to the funnel and the stopper/distributer.
 
mog I would definatly put a check valve in there so when your buddy on the 4 way spews into the hose you don't have any issues.
 
The nozzles are called "barbs" (not a very good pic) they allow you connect a hose with a hose clamp if under pressure, it can be just a "push it on" at such low pressure.



 
You must log in or register to reply here.
Back
Top