How to get tighter handling like my friend's BMW 3-series?

Page 9 - Seeking answers? Join the AnandTech community: where nearly half-a-million members share solutions and discuss the latest tech.
Dec 30, 2004
12,553
2
76
How do you have the Konis set?

Fronts I switched from full soft to full stiff hard to tell a difference new to this. I think I like full stiff more. Rears are...I think I put to full soft. Rears are a HUGE pain to change, have to remove the whole shock, compress the springs remove the springs, and then I can adjust the rears. Guy in another thread at scionlife had Konis for tracking his tC said to put the rears on full stiff. So I may do that, once.
Fronts easy to change.

I became less happy with stock suspension when inflated tires to max psi @ 42 (noticed them bouncing at times going over bumps), haven't tweaked their pressure down yet want to touch one variable at a time.

When I take a turn hard the car barely rolls at all, I do like this very much. It's just if do sharp turns jerking left and right really fast it shows up. Might just be looking for it too hard.
 
Last edited:

JCH13

Diamond Member
Sep 14, 2010
4,981
66
91
My Miata with 450lb-in/300lb-in springs dives a little bit in slaloms, and I bet I've got relatively stiffer springs and sways than you do. Body roll is your car talking to you and is fine unless it's really screwing up your suspension geometry, which it probably isn't in your case. Unless you really screwed up your roll centers, but I don't think you did much of that because your drop was relatively mild, right?
 
Dec 30, 2004
12,553
2
76
My Miata with 450lb-in/300lb-in springs dives a little bit in slaloms, and I bet I've got relatively stiffer springs and sways than you do. Body roll is your car talking to you and is fine unless it's really screwing up your suspension geometry, which it probably isn't in your case. Unless you really screwed up your roll centers, but I don't think you did much of that because your drop was relatively mild, right?

yes 1.2", I just desire to get rid of the roll because it's uncomfortable to feel like you're being tossed out of your seat through the corner :)


those are probably much stiffer
 

FuzzyDunlop

Diamond Member
Jan 30, 2008
3,260
12
81
Get better seats :awe:

this :)
http://www.sparcousa.com/seats.asp
you wont get tossed out of this
seats1.jpg
 

FuzzyDunlop

Diamond Member
Jan 30, 2008
3,260
12
81
do you have those?

Its on my list of possible long term improvements. The stock seats in my MR2 actaully hug me quite well. They have adjustable sides that can be turned in to squeeze around my rib cage. But a tonne of guys have bought these seats and claim that they are `amazing`.
If you are fat, I would recommend against them though.
 
Dec 30, 2004
12,553
2
76
TRD used to sell a supercharger for the Tc several years ago that you could have put on by the dealer and wouldn't void your warranty.

http://cgi.ebay.com/ebaymotors/Scio...r_Truck_Parts_Accessories&hash=item2313d6d0db


I just checked the trd website and it appears that they no longer produce that for Tc. They do have other parts tho, like sway bars, lowering springs, mufflers, and strut tower brace.

http://www.toyotaracing.com/trd/

only had 200hp, they discontinued due to much greater than anticipated warranty claims