How to get the ata133 raid working on the 4bda2+ <fix is inside>

[John]

Drives are set to master on each channel, and the array is defined. When I hit F6 and specify mass storage, I tried the included HP 370a/372 drivers on the floppy included with the mobo, and the 231_370_372 driver from highpoints website. No dice. XP Pro shows the correct capacity during the partition and format procedure, and then copies files. When the PC reboots, it will not boot from the HDD.

Boot seq set in bios to floppy, cdrom, scsi and highpoint/scsi

 

[John]

I found this on the [H|ard forums. Thanks oldfart!



<< I've got the same maxtor drives on raid. If you set it to 133 in the Raid bios it wont boot but if i set it to ultra100 it will boot. It's and XP problem. I dual boot with 2000 and no problem.


When i get into xp on ultra 100, check the raid program it shows ultra133.

IT's XP not the MB >>