How stable should the rails in a psu be?

[Cheezeit]

sry, noob question. how much should they move?

 

[fstime]

For the 12V, anything above 11.90 is fine.

 

[ts3433]

The ATX specification calls for no more than +/- 5% fluctuation.

 

[lotust]

mine is like this

3.3=3.23-3.25

5v=5.00-5.03

12v=12.12-12.30

 

[IntegraGSR]

Originally posted by: ts3433
The ATX specification calls for no more than +/- 5% fluctuation.

what he said

http://img47.exs.cx/img47/4170/specatx.jpg

a lot of the more quality PSU makers have ~1% variation

 

[Cheezeit]

I was going to get the same psu this person has. here are the rails he said:

well the psu isn't installed right now but from memory the 12 idled 12.36-12.40 and load from 12.18-12.24.

the 5v i remember just under 5, around 4.98 i think and tighter under load.

the 3.3 i never checked because its a pita to do and there was no indication it was troublesome.

and load is either prime/occt/3dmarks

Is that okay?

 

[biostud]

As long as it stays within ATX everythin is fine. It just needs to deliver enough to the capacitors to the mboard. These ensure that whatever fluctuation on the voltage line (within ATX standards) will be ~zeroed.