How overclockable is Samsung -TCA0 w/ CTL on PCB or -TCB0? Post ur results

[mr_t]

There is a thread in Hot Deals where people are talking about the overclockability of the RAM. Did any of you here purchase that RAM? How type of RAM and how far were you able to get?

I have a single sided 256MB PC2100 module with -TCA0 on the chips and markings CTL on samsung PCB.
I also have a double sided 256MB PC2100 module with -TCB0 on the chips and markings M381L3313T1 Rev 1.0 on samsung PCB.

I haven't opened the packaging and I Just wanted to know how good these are.

 

[Lizardman]

I got two sticks of samsung at BB.

Model number is K4H560838C-TCA0 rated for 100mhz cas 2


Am able to run it stablily at 200mhz by spd @2.6V

 

[Lizardman]

No one else bought and dam.

 

[mr_t]

Lizardman, were u able to get it stable at anything higher than 133mhz?

 

[Lizardman]

You need to read my earlier posts young one.

 

[drewdogg808]

You need to read my earlier posts young one.

young one? he's been here alot longer than july 2001...

 

[Lizardman]

Quote

--------------------------------------------------------------------------------
You need to read my earlier posts young one.
--------------------------------------------------------------------------------


young one? he's been here alot longer than july 2001...

Yet he still cannot read.

 

[Richardito]

PNY memory is very overclockable. I have a stick of 64mb PC100 that goes up to around 145MHz @CAS 2. I also have a 256mb stick that goes up to 150MHz @CAS 2 and all of the other timings maxed out. I personally love the Infineon chips because they are really high quality.

 

[mr_t]

Like Lizardman, I picked up a -TCA0 with CTL on the PCB and -TCB0 with unrecognizable pcb codes.

Anybody here successful in overclocking -TCB0s?

 

[Lizardman]

Tell us how your CB0 does mr_t


I am sure it will do at leats DDR333 though