How long is this TBred going to last?

[4x4expy]

My 0319 DLT3C 1700+ is stable at 12x200 with 1.775v (1.72v actual) and temps 38c idle and 44c full load. What is the life expectancy of this CPU under these conditions?

 

[redpriest_]

That's a pretty good number, wish I had that chip when I did my tbred oc.....I had to resort to 2.3v to get 15x166 out of a 0310.

Mine ran continuously for a week before I upgraded again to a barton.

The general consensus on the forum appears to be that you're safe below 1.8v, and that 1.85v is 'really pushing it'.

 

[lenjack]

Probably much longer than you'll want to keep the cpu.

 

[rommelrommel]

Mine had been four months plus at 1.88 with no change whatsoever so far.

 

[screw3d]

Originally posted by: 4x4expy
My 0319 DLT3C 1700+ is stable at 12x200 with 1.775v (1.72v actual) and temps 38c idle and 44c full load. What is the life expectancy of this CPU under these conditions?

You've got yourself a sweet chip

1.775v still isn't too "extreme" yet.. a lot of ppl hav wayyy higher voltages than that..and chances are..your m/b prob even undervolts it a bit?

You'll be safe for years don worry