How hot is your LOAD temps on 3.5ghz+ Conroes

[aigomorla]

okey, so i sold my opty for those of you that know me. She was a monster. A guy on another forum bought my chip and i shipped it over seas. She'll be very missed.


Anyhow, i have a E6600 now with a EVGA board. The money from the cpu deal gave me enough to buy the cpu and half the board. 😛

Currently she is clocked at 3.6ghz orthos stable for 3 hours, at 1.392V according to cpu-z.

Now my question is those of you that are clocked at a simular clock speed, what is your load temps?

She's maxing at 51C, which im kinda nervous about. My opty and X2 never hit 50C under any stress. Wondering if thats good? or normal for something around this clock speed.

Idle is also 27-29C which is kinda high compared to my opty whose idle was 21C.

Ambient temps messure 70F for those of you that need this info as well.

 

[aigomorla]

Bah, one of my pumps wasnt hooked up to the power source. 😛

Umm... temps seem to be a bit better it idles at 23-24, however, how is everyone's loads temps at these ghz?


also, my voltage is 1.45 in cmos incase your wondering.


also 13 views yet no one has there CPU clocked to 3.5ghz+ ??

 

[idiotekniQues]

oh noeeees my idle never got above 30c and that is so high at a serious over voltage and killer OC.


what a lame thread. OP is an attention whore for his chips cause he has small balls.

 

[Fullmetal Chocobo]

Wow OP, this is a new low... Next time, try searching for threads like this, and just post in there instead of being so damn blatant about your "look at me, look at me, look at me and my e-peepee".

😕

 

[StopSign]

51C at load is high? No.

 

[nealh]

on my WCin...I idle aroud 38-40C and load temps after 24 hrs of blend prime95 with 1.52v in bios setting...is 53C with coretemp/tat shows 50C...SG shows 55-56C(interrestingly my idle temp agree on all 3 sources within 1-2C)

ambients over the weekend were about 23-24C..cool for Tampa

I am a bit surprised with your WCing setup..your deltas are much worse than my PA160 with a single Panaflo 120x38 fan at 12v....my delta is about 15C...yours is close to 20C

 

[sparkey]

ambient 19 1.475 vcore 400x9 8+hrs orthos idle 32 load 41

 

[nealh]

Originally posted by: sparkey
ambient 19 1.475 vcore 400x9 8+hrs orthos idle 32 load 41

where do you live..ambient of 19c!!!!!

 

[aigomorla]

no it was actually a concern for me. im not bragging. Those of you that know me should know what my cooling capacity is. It was getting concerning as these chips were getting hot.


and i managed to stablize my temps. As i said one of my pumps wasnt working, so something wasnt feeling right. I wanted to know what other people were getting there clocks in at.

YES NEAL thats why i made this thread because my delta's were incredibly off. Thank you for sharing that with the other people and help defend me. Full metal started to make it sound like i was bragging about my cpu. Also full metal, that link you posted has yet to show anyone with a 3.5ghz oc. In fact all the 3.5ghz+ oc ive seen so far flatted at load of around 53C on air. If you compare that to my current water loop, my loads should of been at least 6-8C better then that of the tuniq tower. Do you see my concern now?

Los Angeles gets around that at evening time incase your wondering about the ambients.

At anyrate, i wasnt happy with any temps above 1.45V. The cored would load at over 51-52 sometimes even higher. Motherboard CPU temps would climb to 57C. If you think im bragging, then i would of posted my CPU doing 3.7ghz at 1.5V. YES she is fully capabile of doing it. I was truely worried about my temps, as the last intel i got to touch was a kentsfield on a completely different setup.


OH my kentsfield wouldnt overclock as well because my asus striker was fubard. That is why i wish to know your temps, on simular setups.


At anyrate i got it fixed. My second DDC-2 pump wasnt hooked up. i managed to pull off a lower delta, however she's a lot higher then my opty. She's maxing at around 44C at 3.53ghz instead which i am a lot more comfotable with. 😀


At anyrate, im still playing with her to see where her comfrotable zone is with my cooling setup. I'll post up screenies on the WC sticky on temp and OC results. Im sure you guys were curious on how she would do on a C2D and not AMD.

 

[nealh]

Are you referring to my post???

I was never suggesting you were bragging..I was really surprised given youWCing setup that your temps seem worse than expected...particularly compared to my PA160 and higher ambients in FL

 

[IEC]

As OP has since stated, the temps were bad because he forgot to hook up the power on his 2nd pump 😉

 

[aigomorla]

Originally posted by: nealh
Are you referring to my post???

I was never suggesting you were bragging..I was really surprised given youWCing setup that your temps seem worse than expected...particularly compared to my PA160 and higher ambients in FL

nonno.. neal im saying thank you, for defending me. I really apreciate you telling the other people that you also think somethign was wierd with my loop.

i didnt want this thread to be a flame thread. And im really thanking you for explaining to the other people why i was concerned.

And yeah, it was a unconnected pump. I totally forgot to replug it after my bleeding.

 

[cbuchach]

I'm at 3558 @ 1.5V and my temps under Orthos load go up into the 55-58C range. Using Intel TAT it gets into the low 60's. It idles (depending on ambient temps) from 30-42C.

Hope this helps.

 

[nealh]

Originally posted by: cbuchach
I'm at 3558 @ 1.5V and my temps under Orthos load go up into the 55-58C range. Using Intel TAT it gets into the low 60's. It idles (depending on ambient temps) from 30-42C.

Hope this helps.

very nice temps

As for air cooling giving temps load temps of 50s at 3.5ghz...I want to know vcore and ambients...sorry I have real issues with how people throw temps around

Open case mobo..ie stting on a desk not in case..is not the same as in case....

you have to know ambient temps and voltage otherwise it is almost meaningless..also here is another thing every mobo reports temps differently..even same mobo versions...besides one cant really compare temps becasue of cases, airflow, ambients , hardware..etc...NOT to mention crappy mobo temp sensors...the TEMPS should be used for comaprison sake for the individual setup, IMHO

I had a previous RD600/ICFX3200 T2r/G
ambients of 25C
idle cpu at 1.52v in bios...42/43C...load as high as 58 SG/Coretemp 53/54/ TAT 50/51
NB idle at 47/48 with 1.42v..load was 53/54C max

new mobo
ambient 23/24C
1.52v cpu ..40C.. load SG 56/57/ coretemp 53c/ TAT did not check
1.36v on NB idle 53/54C...load 58

Now I think the new board either reads temp a little high...or my NB really suck the big one..cpu temps are within reasonable variance

 

[cbuchach]

Originally posted by: nealh

Originally posted by: cbuchach
I'm at 3558 @ 1.5V and my temps under Orthos load go up into the 55-58C range. Using Intel TAT it gets into the low 60's. It idles (depending on ambient temps) from 30-42C.

Hope this helps.

very nice temps

As for air cooling giving temps load temps of 50s at 3.5ghz...I want to know vcore and ambients...sorry I have real issues with how people throw temps around

Open case mobo..ie stting on a desk not in case..is not the same as in case....

you have to know ambient temps and voltage otherwise it is almost meaningless..also here is another thing every mobo reports temps differently..even same mobo versions...besides one cant really compare temps becasue of cases, airflow, ambients , hardware..etc...NOT to mention crappy mobo temp sensors...the TEMPS should be used for comaprison sake for the individual setup, IMHO

I had a previous RD600/ICFX3200 T2r/G
ambients of 25C
idle cpu at 1.52v in bios...42/43C...load as high as 58 SG/Coretemp 53/54/ TAT 50/51
NB idle at 47/48 with 1.42v..load was 53/54C max

new mobo
ambient 23/24C
1.52v cpu ..40C.. load SG 56/57/ coretemp 53c/ TAT did not check
1.36v on NB idle 53/54C...load 58

Now I think the new board either reads temp a little high...or my NB really suck the big one..cpu temps are within reasonable variance

Well to clarify, my ambient temp right now is 22.9C with the little digital thermometer on my desk. The case is a closed Antec P180 with an Asus P5W DH MB.

I agree that giving motherboard-reported case temps is useless. For example, it is known that Asus positions the motherboard temp monitor purposefully next to the hottest component on the P5W DH. When it was cooler during the winter, Coretemp would frequently report the CPU temperature several degrees below the supposed motherboard case temp.

 

[Jules]

Originally posted by: idiotekniQues
oh noeeees my idle never got above 30c and that is so high at a serious over voltage and killer OC.


what a lame thread. OP is an attention whore for his chips cause he has small balls.

LMAO

 

[aigomorla]

Originally posted by: MyStupidMouth

Originally posted by: idiotekniQues
oh noeeees my idle never got above 30c and that is so high at a serious over voltage and killer OC.


what a lame thread. OP is an attention whore for his chips cause he has small balls.

LMAO

i dont think stupidmouth knows what cooling i am using for me to be worried. 😛

Anyhow i got my answers on XS as well. It totally wasnt making sense on why my dual pump dual rad high performance watercooling layout was pulling near 30C on idle. To make things clear.

And yes the issue was resolved in inspecting that my second pump wasnt connected after bleeding. Its far easier to bleed with a single pump then dual thanks to the reduced flow. But it was killing my performance. 😛

 

[crispy2010]

Originally posted by: MyStupidMouth

Originally posted by: idiotekniQues
oh noeeees my idle never got above 30c and that is so high at a serious over voltage and killer OC.


what a lame thread. OP is an attention whore for his chips cause he has small balls.

LMAO

I am in tears!!!